NETGEAR GSM7248R Supplement Manual page 12
Shared access to the internet across multiple routing vlans using a prosafe firewall
Hide thumbs
Also See for GSM7248R:
- Command line interface reference manual (394 pages) ,
- Hardware installation manual (34 pages) ,
- Supplement manual (10 pages)
Table of Contents
Advertisement
7 – VLAN routing
By default RIP is enabled on the Layer 3 switches.
RIP can be disabled on all the ports via Routing – RIP – RIP configuration
or alternatively it can be disabled on a per port basis , including the VLAN virtual ports.
The picture below shows RIP enable on all the Virtual ports associated to each of the VLAN
created and the Link State for each port as "Link Down".
The reason for this is due to no device being plugged in any of the VLAN ports – RIP requires at
least one interface to be active in order for the protocol to be able to send routing updates.
12
Advertisement
Table of Contents
