Table of Contents
Advertisement
DMZ To External & DMZ To Internal
This section describes steps to create policies for packets and services from
DMZ networks to External (WAN) networks. Please follow the same procedures
for DMZ networks to Internal (LAN) networks.
Entering the DMZ To External window:
Click DMZ To External under Policy menu and the DMZ To External table
appears displaying currently defined DMZ To External policies.
The fields in the DMZ To External window are:
! Source: source network addresses which are specified in the
DMZ section of the Address window.
! Destination: destination networks, which is the external network
address
! Service: services supported by Servers of external networks.
! Action: control actions, to permit or deny packets from the DMZ
network to external networks travelling through the DFL-80.
! Option: specify the monitoring functions on packets from the
DMZ network to external networks travelling through the Firewall.
! Configure: modify settings or remove policies
! Move: this sets the priority of the policies, number 1 being the
highest priority.
77
Advertisement
Table of Contents
