Safety Information - NETGEAR XAV1601 User Manual

XAV1601 Powerline AV+ 200 Nano User Manual
Modulation type:
Electromagnetic Emissions
Meets requirements of:
Safety Agency Approvals
Meets requirements of:

Safety Information

Follow these safety guidelines to ensure your own personal safety and to help protect your
system from potential damage.
• AC input: 100–240V~, 0.1A (Max).
• Operating temperature: 0C~40 degrees C.
• Actual data throughput will vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate.
• Observe and follow service markings.
• Do not service any product except as explained in your system documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning
bolt may expose you to electrical shock. Only a trained service technician should service
components inside these compartments.
• If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
• The power cable, extension cable, or plug is damaged.
• An object has fallen into the product.
• The product has been exposed to water.
• The product has been dropped or damaged.
• The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling
vents.
• Do not spill food or liquids on your system components, and never operate the product in
a wet environment. If the system gets wet, contact your trained service provider.
• Do not push any objects into the openings of your system. Doing so can cause fire or
electric shock by shorting out interior components.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• Operate the product only from the type of external power source indicated on the
electrical ratings label. If you are not sure of the type of power source required, consult
your service provider or local power company.
OFDM symbol modulation
FCC Part 15 Class B; CE-EMC Class B; 3-home FCC Certificate;
HomePlug AV, IEEE 1901
UL Listed (UL 1950) /cUL IEC950; CE LVD; TUV CB; GS
Appendix A. Supplemental Information | 25