D-Link DFE-690TXD User Manual page 12

Section  - Installation
To complete the installation of the DFE-690TXD:
• Make sure that the DFE-690TXD CD-ROM is inserted in the CD-ROM drive
• The DFE-690TXD is inserted into your laptop
• The laptop is turned ON
• See the section below that corresponds to your Operating System to complete the installation:
Windows 7/Vista Users
® ®
Windows 7 / Vista completes the installation of the DFE-690TXD automatically. An "Installing device driver software" will appear in the
® ®
task bar to indicate that the installation is in progress.
Windows XP Users
®
Windows ® XP completes the installation of the DFE-690TXD automatically. A "Found New Hardware" message will appear in the task bar
to indicate that the installation is complete.
Windows 2000 Users
®
Windows 2000 completes the installation of the DFE-690TXD automatically. When the "hour glass" disappears, the installation is
®
complete.
D-Link DFE-690TXD User Manual 1