LG N2R1D - NAS Server User Manual And Instruction Manual page 4

Safety warning
Do not use damaged electrical cords. This may cause electric shock, and is a
1
fire hazard.
Use a grounded cord and grounded socket to avoid electric shock and damage
2
to components.
Do not handle the electrical cord with wet hands, as this may cause shock and
3
injury.
When removing the plug from the socket, ensure that the plug is handled and
4
not the cord. Otherwise this may cause damage to the plug and even fire.
Always check and use correct voltage to avoid electric shock, severe damage
5
to the system, and fire.
Always use grounded cords and grounded sockets with correct capacity
6
(voltage / current) to avoid the danger of damage, electric shock, and injury.
In the event of noise emanating from the electrical cords or sockets, to avoid fire
7
and injury immediately disconnect, and contact the service centre.
8 Ensure that electrical cords are correctly plugged into the sockets to avoid fire.
Ensure that electrical cords are not damaged or do not have heavy objects
9 placed on them. Keep electrical cords away from children and pets. Damaged
cords may cause electrical shock or fire.
Keep the power cords and sockets clean at all times to avoid fire and electrical
10
shock.
In the event of moisture entering the system, immediately disconnect the
11 power and contact the service centre, to avoid the danger of system damage,
electrical shock, and fire.
12 Do not block vents, as this will cause system damage.
Prior to cleaning the system, always disconnect the power, to avoid damage and
13
electric shock.
In the event of lighting and thunderstorms, immediately physically disconnect
14
the system from any power source, to avoid damage to the system.
Warning