LG N2R1D - NAS Server User Manual And Instruction Manual page 19

2. LG Network Storage Installation
④ System loads system files as it reboots. LG Network Storage shall not be accessed
during the system reboot process.
⑤ After approximately 60 seconds, system reboot is completed with a light alarm
sound. (In the case that network connection has been activated)
⑥ All basic installation required for running the LG Network Storage has been
completed.
In order to configure the volume required for storage of the LG Network Storage user
data, please refer to Chapter 4 and use the web.
* At RAID configuration, the hard drive number and size will determine the RAID
configuration time.
Total HDD Capacity
500GB (250 GB * 2)
1TB (500 GB * 2))
2TB (1 TB * 2)
Note: It is recommended not to use the LG Network Storage while RAID
configuration, as this will cause retardation.
* If the Hard disk has been in use, all the data on it will be lost.
System File Volume and RAID
Installation [Individual disks]
Approx. 10
minutes
Approx. 10
minutes
Approx. 10
minutes
1
Volume and RAID
Approx. 5
minutes
Approx. 10 Approx. 1-2 hour
minutes
Approx. 20 Approx. 4-5 hour
minutes
[RAID 1]
Approx. 1 hour