Table of Contents
Advertisement
Quick Links
ME-1 VERSION 1.2 SOFTWARE SUPPLEMENT
• What Is It?
Software version v1.2 is the latest set of feature enhancements for the ME-1 module.
• What Does It Do?
v1.2 adds the ability to enable/disable individual MIDI channels. See the section below
marked "Operation of New Feature" for operational details.
• How Do I Know If I Have v1.2?
If you received this document along with the purchase of a ME-1, then the v1.2 software
should already be installed in your unit. If you did not receive this document along with your
instrument or if you just want to confirm things, you can check what version of software you
currently have installed by doing the following:
1) turn it on while depressing the 'bank/menu' button.
2) following the KURZWEIL name scrolling across the screen you will see
EV ** and FV ** (stands for Engine Version and Front Version).
3) versions EV 11 and FV 12 or later should be shown
• Where Can I Get It If I Don't Have It?
If you do not have v1.2 of the ME-1 'Front' software and would like to get it, you can get your
ME-1 upgraded by taking your unit to an authorized Kurzweil Service Center where they
can update it for you.
To locate a service center near you please visit our website at:
http://www.kurzweilmusicsystems.com/support-service-center-search.html?Id=296
For further information please contact:
Email=
support@kurzweilmusicsystems.com
Web= www.kurzweilmusicsystems.com
-July 2003-
(i.e. what are the new features in v1.2?)
1
Advertisement
Table of Contents
Related Manuals for Kurzweil ME-1 V1.2 - ADDENDUM
Summary of Contents for Kurzweil ME-1 V1.2 - ADDENDUM
- Page 1 If you do not have v1.2 of the ME-1 ‘Front’ software and would like to get it, you can get your ME-1 upgraded by taking your unit to an authorized Kurzweil Service Center where they can update it for you.
- Page 2 ME-1 Addendum Operation of New Feature: Enabling/Disabling Individual MIDI Channels An enabled MIDI channel (ON) will receive MIDI data. A disabled MIDI channel (OFF) will ignore MIDI signals received on that channel. Prior to this new v1.2 software all 16 MIDI channels were ON all the time.
- Page 3 Here is how to select an instrument using the front panel buttons following the table on page 9 in the ‘Reference Guide’: 1) press [Mode Select] button until ‘Channel’ Mode light is lit. 2) using the Data knob, select the desired MIDI channel (1-16) 3) press [Mode Select] button until ‘Program’...
- Page 4 ME-1 Addendum Example #1: If, on MIDI channel 1, you want to select MIDI Bank 0, “77=Scatman”, then: 1) from your transmitting device (keyboard, sequencer, whatever) set it to send a MIDI Bank message (Controller 32) with a value of 0 on channel 1 to the ME-1. 2) following, have your transmitting device send a Program Change with a value of 77.
Need help?
Do you have a question about the ME-1 V1.2 - ADDENDUM and is the answer not in the manual?
Questions and answers