Advertisement
Wire colors and connection points for connection cables
Never connect the power supply to the speaker leads (No.5 and No.6),
otherwise it will cause damage to the main unit.
Caution
B+ (Yellow)
1
Connect where the power is constantly available, regardless of the ignition key's position.
2
Ground (Black)
Connect where good body grounding is available.
DVD MUTE wire (Pink)
3
Connect to H/A MUTE or DVD MUTE on the main unit.
NAVI MUTE wire (Brown)
4
Connect to NAVI MUTE on the navigation unit.
Front speaker output leads
5
Connect to the front speakers.
White:
Gray:
Rear speaker output leads
6
Connect to the rear speakers.
Green: Left +
Purple: Right +
Main unit connectioms
A
E-LAN terminal
Connect to the main unit or to a CD changer (sold separately) if one is being used with the system.
B
Line-out terminal (Front Mid-Low)
C
Line-out terminal (Front / Front Mid)
D
Line-out terminal (Front Hi)
*
The speakers to connect will vary depending on whether the speaker layout is
3-way speaker. (Refer to the instruction manual for details on switching the speaker layout.)
• • If the speaker layout is "1-way speaker":
Use the "LINE OUT" (Front/Front/Mid) terminal
Terminals
• • If the speaker layout is "3-way speaker":
Connect
(squawker), and connect
E
Line-out terminal (Rear)
Connect to the RCA input Connectors of an external amplifier.
Left +
White/Black:
Right +
Gray/Black:
Green/Black:
Purple/Black:
and
are not used.
B
D
to the low-range speaker (woofer), connect
B
to the high-range speaker (tweeter).
D
White : Left signal
Red :
If not using
and
3
them using PVC tape or similar.
If they are not insulated, incorrect
operation may result.
Left -
Right -
Left -
Right -
Connect to the RCA input Connectors of an external
amplifier.
White :
Left signal
Red :
Right signal
C
.
C
Right signal
- 6 -
2
, insulate
4
1-way speaker
or
•
•
to the mid-range speaker
•
Advertisement
