Measuring; A) Switching On The Measuring Instrument - VOLTCRAFT MULTI-DMM MT-52 - V09-10 Operating Instructions Manual

%RH Relative air humidity
nF Nanofarad (exp.-9), unit of electric capacity
µF Microfarad (exp.-6)
mF Millifarad (exp.-3)

Measuring

Do not exceed the maximum permitted input values. Do not touch any circuits or
parts of circuits if there could be voltages higher than 50 V ACrms or 75 V DC present
within them. Danger to life!
Before measuring, check the connected measuring accessories for damage such as,
for example, cuts, cracks or squeezing. Never use defective measuring equipment!
Danger to life!
During measuring, do not grip beyond the tangible grip range markings present on
the test prods.
Measuring is only permitted when the battery and fuse compartment is closed.
You may only connect the measuring leads to the measuring device that are required
for measuring operation. Remove all measuring lines not required from the device
for safety reasons.
As soon as "OL" or "I" (overload) appears on the display, you have exceeded the measuring
range.

a) Switching on the Measuring Instrument

Turn the rotary control (4) to the corresponding measurement function. To switch off turn the rotary con-
trol to "OFF". Always turn the device off when it is not in use.
Prior to working with the meter, you have to insert the enclosed battery. Insertion and chan-
ging of the battery is described in the "Cleaning and Maintenance" chapter.
42