Advertisement
More than just a tractor...
....more than just a headland management system – Datatronic's
advanced features that help you every step of the way.
Programmed headland
Recorded information includes:
and implement control
• tractor settings, including
with Datatronic III
Datatronic III is controlled from a
main screen with up to seven main
• implement width
application menus, plus 'Settings'
• information gathered during
for console set-up.
Work menu
The work screen displays engine
and PTO speed, travel speed and
Electro-hydraulic
wheelslip information. A wide
spool valves menu
range of tractor functions can
The EHS Valves menu is used to
also be displayed and controlled,
set the operating characteristics of
including spool valves, memory,
up to four electro-hydraulic spool
Dual Control and TIC.
valves. You can enable or disable
'float' and accurately set ram
Headland menu
extension and retraction, flow
The Headland menu, quite
rates and kickout timing.
simply, gives access to the
most comprehensive headland
ISOBUS compatibility
management system
ISOBUS, the industry-standard
available today.
for implement connectivity, means
that all of your equipment can be
It enables straightforward
easily set up and operated via
programming of up to 35
the GTA Console.
operations, activated at the touch
of an armrest-mounted button.
Remote camera
The sequence can be modified
The optional remote video camera
or over-ridden at any time.
can be fitted anywhere on the
tractor or on any front or rear-
Memories menu
mounted implement.
Six independent sets of information
can be stored, named and
Used in conjunction with clear on-
displayed. The data can also be
screen view (actual image shown)
transferred, via SD memory card,
on the GTA Console when reversing
to the office computer for analysis
enables faster, safer haulage work
or from tractor to tractor to speed-
or, the operator to view any rear or
up implement setup.
side-mounted equipment.
22
Dual Control menu
The Dual Control menu enables
gearbox, spool valves or a
fully programmed command of
recorded headland sequence;
front and rear Dual Control and
Trailed Implement Control, so
maximum output and work quality
field operation, including hours
can be achieved with a minimum
and area worked, fuel usage,
of operator input.
distance covered... and more.
When using semi-mounted
ploughs, Dual Control automates
furrow entry and exit, aids setting
the plough, improves evenness
and control of work and gives the
full benefit of wheelslip control.
When front linkage is fitted, front
Dual Control gives automated
depth and entry and exit points
with front and rear linkage-
mounted equipment.
Trailed Implement Control (TIC)
TIC uses wheelslip data to
automatically regulate working
depth to optimise productivity
when using trailed equipment.
It is operated via the standard
armrest-mounted ELC controls
with set-up and monitoring via
either ITCS or Datatronic III.
For comprehensive information about
Massey Ferguson advanced Field
and Headland Management systems,
please ask your Dealer for the
'MF Technology' brochure.
01
02
ROTARY HARROW
04
06
07
ON
03
05
08
23
Advertisement
