FS700TS Smart Switch Software Administration Manual
LAG Membership
The Advanced LAG Membership screen allows network managers to assign ports to LAGs.
To assign ports to LAGs:
1. Click Switching > LAG > Advanced > LAG Membership. The LAG Membership screen
displays:
Figure 4-6
The Advanced LAG Membership screen contains the following fields:
•
LAG ID – Select the LAG ID.
•
LAG Name – Displays the user-defined LAG name.
•
LAG Type – Select the LAG type. The possible field values are:
–
Static – The LAG is configured manually.
–
LACP – The LAG is configured automatically.
•
CURRENT MEMBERS – Display current members of a LAG.
2. Select the LAG ID and LAG Type.
3. Click on the unit's gold button. The unit's port panel displays.
Configuring Switching Settings
v1.0, September 2007
4-11