Samsung CLX 6210FX - Color Laser - All-in-One Admin Manual page 44

ITEM
General
Consumables
Sound/Volume
Host Name, Location and Contact refers to public MIB (RFC1213). If other vendors
support RFC1213, you can configure these options via SyncThru™ Admin 5. Set the option
and click Add.
• Asset Number : Asset number can be used to manage a device as an asset. You can
add any value for this option since its purpose is to help you manage the device. Type
in the number you want to use as an asset number and click Add.
• Distributor Name : You can configure the distributor name for a device. You can add
any value for this option since its purpose is to help you manage the device. This can
be a vendor name or contact person. Type in the name and click Add.
• Custom Field 1~5 : Custom fields can be used when you want to mark additional
information for devices. You can add any value for this option since its purpose is to
help you manage the device. Type in the information you want to add and click Add.
• Console Locked : This option is policy on local console usage. If you lock the console,
the device will not allow use of the local device for input, but warnings and information
will still be output to the console. If you disable Console Locked, the device will allow
use of the local console.
• Clock Mode : You can set the clock display mode – either 12-hour or 24 hour. Set the
mode and click Add.
• Power Save Timeout : You can set the time (in seconds) that the system will wait
before entering power save mode. 0 means disabling power save mode. Set the option
and click Add.
• System Timeout : You can set the time (in seconds) that the system will wait for
console (local use interface) input before returning to default console settings. Set the
option and click Add.
• Job Timeout : You can set the time (in seconds) that the system will hold a print job
before aborting. Values should be 15 seconds or more for reliable job submission over
congested enterprise networks.
• Altitude Adjust : You can figure the atmospheric pressure, which affects print quality.
Available values are Normal, High 1, High 2 and High 3. High 3 being the highest
altitude.
• Toner Save Enable : This option is policy for toner saving on the system. If you enable
this option, the system will extend toner cartridge life without significant degradation of
print quality. Set the option and click Add.
• Ignore Toner Low Enabled : This option is system policy for when toner is low. If you
enable this option, the system will not stop when toner is low. Set the option and click
Add.
• Ignore Toner Empty Enabled : This option is system policy for when toner is empty. If
you enable this option, the system will not stop when toner is empty. Set the option and
click Add.
• Toner Low Alert Display Enabled : This option is policy for the display of toner low
alert on the device itself (local user interface). If you enable this option, the system will
display toner low alert on the device when a toner low condition occurs. This option is
related to the Toner Low Alert Threshold option. Set the option and click Add.
• Toner Low Alert Threshold(%) : This option is the toner low threshold in a percentage.
For example, if you configure 30 for this option and enable Toner Low Alert Display
Enabled, you can see the toner low alert message on the device when the toner
remaining level meets 30%. Set the option and click Add.
• Key Sound Enabled : This option is policy on key sound usage. If you enable this
option, pressing a key on the device will be confirmed with an audible key sound. Set the
option and click Add.
• Alarm Sound Enabled : This option is policy on audible alarm usage. If you enable this
option, the system alarm will be confirmed with an audible alarm sound. Set the option
and click Add.
• Speaker (Fax Sending) : This option is policy on Fax Speaker usage for outgoing calls.
If you set this option to Off, the Fax Speaker is turned off. If you set this option On, the
Fax Speaker is turned on throughout outgoing fax transmission. If you configure Comm.,
the Fax Speaker is turned on only during dialing and connection negotiation, but is
turned off during fax data transfer (i.e. typical modem behavior). Set the option and click
Add.
• Ringer (Fax Receiving) : This option is policy on the Fax Ringer usage for incoming
calls. If it's set to Off, Fax Ringer is turned off. Other options are Low (quiet), Mid
(Normal) or High (Loud). Set the option and click Add.
Devices_ 44
OPTION&DESCRIPTION