Device Information - Samsung CLX 6210FX - Color Laser - All-in-One Admin Manual

• Filtering : You can use filtering to display the Device List based on the specified criteria. There are two ways to
filter lists.
The first way is to use the Show option (
The options are as follows:
- All : Shows all devices.
- New : Shows newly discovered devices only. You can change the period for New devices in Settings menu >
Settings > Device Management > Discovery > Discovery Settings > New Devices (Time Period) > Days
Device Remains
- Color : Shows devices with color capability.
- Error : Shows devices in error status.
- Disconnected : Shows devices in disconnected status.
- Warning : Shows devices in warning status.
The second way is to use a custom filter. SyncThru™ Admin 5 supports the custom filter based on device
properties. The custom filter can help you much more than the Show option because it provides various properties
and operators. For example, if you want to see devices that have IP addresses from 1.1.1.1 to 1.1.1.15, you can
create the custom filter as follows:
- Property = IP Address
- Compound Option = IP Range
- Property Value = 1.1.1.1 – 1.1.1.15.
The custom filter is also used for grouping. When you create a new group, you can see the option,
Automatically add discovered device to this group, which has the same concept as custom filtering (See
"Filtering" on page 34, "Using customized group with options" on page 40).
• Adding a device : You can discover and add a device into the Device List with the
add devices one by one without using a discovery method, you can use this button.
• Deleting devices : You can delete devices in the Device List with
devices.
- Delete Devices from Group : This option deletes the devices in the group. This only means that devices will
not be deleted from the system and it may be found in other groups.
- Delete Devices from System : This option deletes the devices in SyncThru™ Admin 5. This means that
devices will be removed from all the groups and can be found again only after a new discovery.
- Delete Devices from System and Block : This option deletes the devices in SyncThru™ Admin 5 and blocks
them from the Device List. New discovery will not add the devices into the Device List. You can see the
blocked devices in Settings menu > Settings > Device Management > Blocked Devices.
• Viewing device details : You can see device details by double-clicking any device from the Device List. Details
include Device Information (Input Tray, Output Tray, or Capability Information etc.), Supply Information,
Usage Meters and Alerts.

Device information

You can see some basic information about the devices from the Device information panel. Select the devices you
want to see from the Device List and you can see the information in the Device information panel. If you select more
than 10 devices, the Device information panel displays only the description.
• Configuration : Configure the selected devices (See "Using the Modify button" on page 42).
• Map : Checks the device location (if Device Map Plug-in is installed).
• SWS : Opens the SyncThru Web Service of the selected device.
• Test print : You can remotely print a test page from the device. It can be used when you need to check if the
printer is working fine.
This Test print request will be sent with SNMP command, which means you need to check if your device's SNMP
Write Community is same as SyncThru™ Admin 5's Write Community.
(See "Connection Settings" on page 31)
• Display message : The blue box shows the same information displayed on the device's LCD display.
• Updating device information : SyncThru™ Admin 5 collects device information periodically using SNMP. Basic
information is based on public MIB, RFC 3805. For more detailed information, please see the Data Reference
chapter (See "Data reference" on page 89).
). Choose the option you want from the drop-down list.
Devices_ 34
button. If you want to
button. There are three ways to delete