D-Link EasySmart DGS-1100-08 Specifications page 2

D-Link Green/Power Saving Performance
Compliant with IEEE802.3az Energy Efficient Ethernet, these switches consume
less energy by cutting down on power consumption when the traffic volume is
low. By deploying EEE devices, users can cut operating costs and even cut down
on necessary cooling equipment, helping small and medium sized businesses stay
within their budgets. The DGS-1100 Series also features D-Link Green Technology
that helps in automatically saving energy. The switches automatically detect the
length of the connected cables and can adjust power usage for shorter cable
connections of up to 20 meters. In addition, the switches monitor link status of every
port and drastically reduces power consumption when a port is without a link.
Easy to deploy
The DGS-1100 EasySmart Switches support an intuitive SmartConsole utility and
a web-based management interface that enables administrators to remotely
control their network down to the port level. The SmartConsole allows customers
to discover multiple D-Link Smart and EasySmart Switches within the same L2
network segment. With this utility, users do not need to change the IP address
of their PC, and makes initial setup of the Smart Switches quick and easy.
Switches within the same L2 network segment that are connected to the user's
PC are displayed on-screen for instant access. This allows for extensive switch
configuration and basic setup of discovered devices, including password changes
and firmware upgrades.
Technical Specification
General
Port Standard & Functions
Number of Ports
DGS-1100-08
8
DGS-1100-08/16/24
Easy Troubleshooting/Security
Network maintenance features include Loopback Detection and Cable
Diagnostics. Loopback Detection is used to detect loops created by a specific port
and automatically shuts down the affected port. Cable Diagnostics is designed for
network administrators to quickly examine the quality of the copper cables and
also determine the type of cable error. In addition, Static MAC can disable Auto
Learning on selected ports and can set static MAC addresses for designated ports,
helping administrators limit network access to authorized devices only.
Easily find, manage, and update your SmartSwitches from
the SmartConsole Utility.
DGS-1100-16
IEEE 802.3 compliant
IEEE 802.3u compliant
IEEE 802.3ab compliance
Supports Half/Full-duplex operation at 10/100Mbps
Supports Full-duplex operation at 1000Mbps
Supports Auto-Negotiation for each port
Auto MDI/MDIX
IEEE 802.3x Flow Control support
IEEE 802.3az compliant
16
EasySmart Switch
DGS-1100-24
24