Download
Share
Print this page
Acura MDX 2006 Manual
  1. Manuals
  2. Brands
  3. Acura Manuals
  4. Automobile
  5. MDX 2006
  6. Manual
Acura MDX 2006 Manual

Acura MDX 2006 Manual

Accessories & equipment
Hide thumbs

Advertisement

Quick Links

Download this manual
COMPONENT LOCATION INDEX
Fig. 1: Locating Seats Components
Courtesy of AMERICAN HONDA MOTOR CO., INC.
FRONT SEAT REMOVAL/INSTALLATION
Special Tools Required
KTC trim tool set SOJATP2014
SRS components are located in this area. Review the
SRS component locations for the appropriate model:
'03 model (see 2003 MODEL )
2006 Acura MDX
2006 Acura MDX
2003-06 ACCESSORIES & EQUIPMENT Seats - MDX
2003-06 ACCESSORIES & EQUIPMENT Seats - MDX
2003-06 ACCESSORIES & EQUIPMENT
Seats - MDX

Advertisement

loading
Need help?

Need help?

Do you have a question about the MDX 2006 and is the answer not in the manual?

Questions and answers

Related Manuals for Acura MDX 2006

Summary of Contents for Acura MDX 2006

  • Page 1 2006 Acura MDX 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX COMPONENT LOCATION INDEX Fig. 1: Locating Seats Components Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 2 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX '04-06 models (see 2004-2006 MODELS ) Also review the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service. NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Page 3 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 2: Removing Rear Riser Cover (Driver's Seat) Courtesy of AMERICAN HONDA MOTOR CO., INC. 4. Passenger's seat: Detach the clips, then remove the rear riser cover (A). The 8-way power seat is shown,...
  • Page 4 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 3: Removing Rear Riser Cover (Passenger's Seat) Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Remove the passenger's seat belt lower anchor bracket (see step 6 in FRONT SEAT BELT REPLACEMENT ).
  • Page 5 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 4: Removing Front Riser Cover (Driver's Seat) Courtesy of AMERICAN HONDA MOTOR CO., INC. 8. Passenger's seat: Release the tabs (A), and detach the clips, then remove the front riser cover (B).
  • Page 6 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 5: Removing Front Riser Cover (Passenger's Seat) Courtesy of AMERICAN HONDA MOTOR CO., INC. 9. Disconnect the negative cable from the battery, and wait at least 3 minutes before continuing.
  • Page 7 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX...
  • Page 8 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 6: Removing Bolts Securing Front Seat Courtesy of AMERICAN HONDA MOTOR CO., INC. 11. Lift up the front seat, then disconnect the seat harness connector (A) and side airbag harness connector (B).
  • Page 9 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 8: Disconnecting Seat Harness Connector (Passenger's Seat) Courtesy of AMERICAN HONDA MOTOR CO., INC. 12. Remove the headrest. 13. With the help of an assistant, carefully remove the front seat through the front door opening.
  • Page 10 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Reconnect the negative cable to the battery. Do the PCM idle learn procedure (see PCM IDLE LEARN PROCEDURE ) and the power window control unit reset procedure (see RESETTING THE POWER WINDOW CONTROL UNIT ).
  • Page 11 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 9: Tightening Seat Mounting Bolts In Sequence Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 12 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX FRONT SEAT DISASSEMBLY/REASSEMBLY - DRIVER'S 8-WAY POWER Special Tools Required KTC trim tool set SOJATP2014 '03 MODEL SRS components are located in this area. Review the SRS component locations (see 2003 MODEL ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service.
  • Page 13 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 10: Front Seat Disassembly/Reassembly - Driver's 8-Way Power ('03 Model) Courtesy of AMERICAN HONDA MOTOR CO., INC. Special Tools Required KTC trim tool set SOJATP2014 '04-06 MODELS SRS components are located in this area. Review the SRS component locations (see 2004-2006 MODELS ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service.
  • Page 14 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Driver's seat position sensor replacement Cover plate (front side of driver's seat slide rail) replacement NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Page 15 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX FRONT SEAT DISASSEMBLY/REASSEMBLY - PASSENGER'S 8-WAY POWER Special Tools Required KTC trim tool set SOJATP2014 SRS components are located in this area. Review the SRS component locations for the appropriate model:...
  • Page 16 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 12: Front Seat Disassembly/Reassembly - Passenger's 8-Way Power ('04-06 Models) Courtesy of AMERICAN HONDA MOTOR CO., INC. FRONT SEAT DISASSEMBLY/REASSEMBLY - PASSENGER'S MANUAL Special Tools Required KTC trim tool set SOJATP2014 SRS components are located in this area.
  • Page 17 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Also review the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service. The seat weight sensor (SWS) unit must be calibrated (see CALIBRATING THE FRONT PASSENGER'S...
  • Page 18 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 13: Front Seat Disassembly/Reassembly - Passenger's Manual ('04-06 Models) Courtesy of AMERICAN HONDA MOTOR CO., INC. FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY - 8-WAY POWER The operation of the driver's seat position sensor must be checked (see OPERATION CHECK OF THE...
  • Page 19 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX NOTE: Replace the bushings with new ones. Apply multipurpose grease to the sliding and pivot portions. Check operation of the recline adjuster and slide/up-down adjuster. Fig. 14: Front Seat Linkage Disassembly/Reassembly - 8-Way Power (Driver's Seat)
  • Page 20 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 15: Front Seat Linkage Disassembly/Reassembly - 8-Way Power (Passenger's Seat) Courtesy of AMERICAN HONDA MOTOR CO., INC. FRONT PASSENGER'S SEAT RISER DISASSEMBLY/REASSEMBLY The seat weight sensor (SWS) unit must be calibrated (see CALIBRATING THE FRONT PASSENGER'S...
  • Page 21 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX the front passenger's airbag system to malfunction. Make sure the weight sensor unit connectors plugged in properly. Make sure the weight sensor wires are routed properly so they are not pinched or interfere with other parts.
  • Page 22 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Also review the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or service. The operation of the driver's seat position sensor must be checked (see OPERATION CHECK OF THE...
  • Page 23 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 17: Removing Clip And Lumbar Support Knob Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Release the hook strips (A), hooks (B, C), and inside springs (D), then loosen the seat-back cover (E).
  • Page 24 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 18: Identifying Hook Strips, Hooks And inside Springs Courtesy of AMERICAN HONDA MOTOR CO., INC. 6. Lift and pull out the release button (A), and remove the screw (B), then remove the headrest guide (C).
  • Page 25 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 19: Removing Headrest Guide...
  • Page 26 To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners, hooks and inside springs. Replace the any clips (A) you removed with new ones using commercially available upholstery ring pliers (B). Use only original Acura replacement seat-back covers.
  • Page 27 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 21: Replacing Clips Removed Using Upholstery Ring Pliers Courtesy of AMERICAN HONDA MOTOR CO., INC. SEAT CUSHION COVER 1. Remove the front seat (see FRONT SEAT REMOVAL/INSTALLATION ). 2. Remove the seat cushion, driver's 8-way power - '03 model (see '03 MODEL ), driver's 8-way power -...
  • Page 28 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 22: Releasing Clips And Hooks From Under Seat Cushion Courtesy of AMERICAN HONDA MOTOR CO., INC. 4. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the...
  • Page 29 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 23: Removing Seat Cushion Cover Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Install the seat cushion cover in the reverse order of removal, and note these items: To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and hooks.
  • Page 30 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX ring pliers (B). Fig. 24: Removing Clips Using Upholstery Ring Pliers Courtesy of AMERICAN HONDA MOTOR CO., INC. SECOND ROW SEAT REMOVAL/INSTALLATION Special Tools Required KTC trim tool set SOJATP2014...
  • Page 31 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to scratch the body or tear the seat covers. Put on gloves to protect your hands.
  • Page 32 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 25: Removing Front Foot Covers Courtesy of AMERICAN HONDA MOTOR CO., INC. 2. Slide the seat back, and remove the mounting bolts. 3. Fold the seat-back forward. With the help of an assistant, remove the right second row seat through the door opening.
  • Page 33 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX LEFT SECOND ROW SEAT 1. Remove the left second low seat belt center anchor bolt (see step 1 in LEFT SEAT BELT BUCKLE AND CENTER SEAT BELT DETACHABLE ANCHOR ).
  • Page 34 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 26: Removing Foot Covers...
  • Page 35 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Courtesy of AMERICAN HONDA MOTOR CO., INC. 4. Remove the mounting bolts. 5. Fold the seat-back forward. With the help of an assistant, remove the left second row seat (D) through the door opening.
  • Page 36 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 27: Left Second Row Seat Disassembly/Reassembly Courtesy of AMERICAN HONDA MOTOR CO., INC. RIGHT SECOND ROW SEAT DISASSEMBLY/REASSEMBLY Special Tools Required KTC trim tool set SOJATP2014 '03 MODEL NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Page 37 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX cable. Replace any damaged clips as new ones. Make sure the seat-back recline cable and third row seat access cable are connected securely. To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
  • Page 38 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Special Tools Required KTC trim tool set SOJATP2014 '04-06 MODELS NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to kink the seat-back recline cable and third row seat access cable.
  • Page 39 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 29: Right Second Row Seat Disassembly/Reassembly ('04 -06 Models) Courtesy of AMERICAN HONDA MOTOR CO., INC. RIGHT SECOND ROW SEAT LINKAGE DISASSEMBLY/REASSEMBLY NOTE: Take care not to kink the slide cable.
  • Page 40 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX the cable. Fig. 30: Right Second Row Seat Linkage Disassembly/Reassembly ('03 Model) Courtesy of AMERICAN HONDA MOTOR CO., INC. Fig. 31: Right Second Row Seat Linkage Disassembly/Reassembly ('04-06...
  • Page 41 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Models) Courtesy of AMERICAN HONDA MOTOR CO., INC. SLIDE CABLE ADJUSTMENT - '03 MODEL Check the third row seat access operation. If necessary, turn the adjuster (A) clockwise or counterclockwise to move the crank (B) back and forth.
  • Page 42 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to tear the seams or damage the seat covers. Take care not to kink the cables.
  • Page 43 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 33: Prying Out Lid Courtesy of AMERICAN HONDA MOTOR CO., INC. 7. Left second row seat: Remove the screw (A) securing the inner recline cable (B), release the clips (C) and...
  • Page 44 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 34: Removing Inner Recline Cable Screw (Inner) Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 45 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 35: Removing Inner Recline Cable Screw (Outer) Courtesy of AMERICAN HONDA MOTOR CO., INC. 8. Right second row seat: Detach the clip (A) and recline cable (B) from the bracket.
  • Page 46 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 36: Detaching Clip And Recline Cable Courtesy of AMERICAN HONDA MOTOR CO., INC. 9. Peel the tapes (A) off, and pull the recline lever (B) with the recline cables (C). There is no inner recline...
  • Page 47 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 37: Peeling Tapes And Pulling Recline Lever With Recline Cables Courtesy of AMERICAN HONDA MOTOR CO., INC. 10. Install the lever in the reverse order of removal, and note these items: Make sure the recline cables are connected securely.
  • Page 48 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 38: Removing Clip From Adjuster Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 49 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX SECOND ROW SEAT-BACK RECLINE CABLE REPLACEMENT Special Tools Required KTC trim tool set SOJATP2014 NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Page 50 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 39: Inserting Screwdriver Through Hole In Housing Courtesy of AMERICAN HONDA MOTOR CO., INC. 3. Carefully pry out the cover (A) with a trim tool at the gap while holding the lever open. Release the tabs...
  • Page 51 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 40: Prying Out Cover with Trim Tool At Gap Holding Lever Open Courtesy of AMERICAN HONDA MOTOR CO., INC. 4. Disconnect the recline cables (A). There is no inner recline cable on the right recline lever.
  • Page 52 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 41: Disconnecting Recline Cables Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Install the second row seat-back recline cables in the reverse order of removal, and make sure the cables...
  • Page 53 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX are connected securely. THIRD ROW SEAT ACCESS CABLE REPLACEMENT NOTE: Take care not to bend the cable. 1. Slide the right second row seat forward fully. 2. Remove the pivot bolt cover, and using a T30 Torx bit, remove the pivot bolt from both sides, '03 model (see '03 MODEL ), '04-06 models (see '04-06 MODELS ).
  • Page 54 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX...
  • Page 55 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 42: Disconnecting Third Row Seat Access Cable Courtesy of AMERICAN HONDA MOTOR CO., INC. 6. Install the third row seat access cable in the reverse order of removal, and make sure the cable is connected securely.
  • Page 56 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX...
  • Page 57 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 43: Pulling Panel Upward Courtesy of AMERICAN HONDA MOTOR CO., INC. 2. Using a T30 Torx bit, remove the screws, then remove the armrest (A).
  • Page 58 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX...
  • Page 59 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 44: Removing Armrest Courtesy of AMERICAN HONDA MOTOR CO., INC. 3. Pry the rear hooks (A) up, and release the front hooks (B), then remove the armrest beverage holder (C).
  • Page 60 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX prying components. Take care not to tear the seams or damage the seat covers. Put on gloves to protect your hands. SEAT-BACK COVER 1. Slide the right second row seat forward fully.
  • Page 61 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX...
  • Page 62 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 46: Removing Third Row Seat Access Knob Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Fold the seat-back forward fully, detach the clips (A), and remove the back cover (B). Replace any...
  • Page 63 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 47: Detaching Clips And Removing Back Cover (Left Seat Back) Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 64 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 48: Detaching Clips And Removing Back Cover (Right Seat Back) Courtesy of AMERICAN HONDA MOTOR CO., INC. 6. Release all of the clips (A) from the back of the seat-back (B).
  • Page 65 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 49: Releasing Clips From Back Of Seat-Back (Left Seat-Back) Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 66 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 50: Releasing Clips From Back Of Seat-Back (Right Seat-Back) Courtesy of AMERICAN HONDA MOTOR CO., INC. 7. Lift and pull out the release button (A), and remove the screw (B), then remove the headrest guide (C).
  • Page 67 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 51: Removing Headrest Guide...
  • Page 68 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Courtesy of AMERICAN HONDA MOTOR CO., INC. 8. Remove the screws securing the recline lever (see step 6 in SECOND ROW SEAT-BACK RECLINE LEVER REPLACEMENT ). 9. While holding the recline lever (A) away from the seat-back cover (B), pull the retainers (C) out from...
  • Page 69 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 52: Holding Recline Lever Away From Seat-Back Cover Courtesy of AMERICAN HONDA MOTOR CO., INC. 10. Pull back the edge of the seat-back cover all the way around, and release the clips (A), then remove the...
  • Page 70 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 53: Releasing Clips To Remove Seat-Back Cover Courtesy of AMERICAN HONDA MOTOR CO., INC. 11. Install the seat-back cover in the reverse order of removal, and note these items: To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and clips.
  • Page 71 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 54: Replacing Clips With Upholstery Ring Pliers Courtesy of AMERICAN HONDA MOTOR CO., INC. SEAT CUSHION COVER 1. Slide the right second row seat forward fully. 2. Left second row seat: Remove the left second row seat belt center anchor bolt (see step 1 in LEFT SEAT BELT BUCKLE AND CENTER SEAT BELT DETACHABLE ANCHOR ).
  • Page 72 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 55: Releasing Hook Strips From Under Seat Cushion Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Left second row seat: Remove the seat belt buckle pocket (see step 4 in LEFT SEAT BELT BUCKLE...
  • Page 73 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 56: Releasing Clips To Remove Seat Cushion Cover Courtesy of AMERICAN HONDA MOTOR CO., INC. 7. Install the seat cushion cover in the reverse order of removal, and note these items: To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and hooks.
  • Page 74 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 57: Removing Clips Using Ring Pliers Courtesy of AMERICAN HONDA MOTOR CO., INC. THIRD ROW SEAT REMOVAL/INSTALLATION Special Tools Required KTC trim tool set SOJATP2014 NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Page 75 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 58: Removing Front Mounting Bolt Covers Courtesy of AMERICAN HONDA MOTOR CO., INC. 2. Lift the seat cushion up. 3. Remove the rear mounting bolts, then remove the third row seat (A) through the tailgate opening.
  • Page 76 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 59: Removing Third Row Seat Through Tailgate Opening Courtesy of AMERICAN HONDA MOTOR CO., INC. 4. Install the third row seat in the reverse order of removal.
  • Page 77 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX THIRD ROW SEAT DISASSEMBLY/REASSEMBLY Special Tools Required KTC trim tool set SOJATP2014 NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. Take care not to kink the seat-back recline cable.
  • Page 78 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 60: Third Row Seat Disassembly/Reassembly Courtesy of AMERICAN HONDA MOTOR CO., INC. THIRD ROW SEAT-BACK RECLINE CABLE REPLACEMENT Special Tools Required KTC trim tool set SOJATP2014 NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Page 79 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 61: Prying Out Cover With Screwdriver To Release Tabs Courtesy of AMERICAN HONDA MOTOR CO., INC. 3. Disconnect the recline cable (D). 4. Install the third row seat-back recline cable in the reverse order of removal, and make sure the cable is connected securely.
  • Page 80 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Put on gloves to protect your hands. SEAT-BACK COVER 1. Remove both front mounting bolts, then lift the seat cushion up (see step 1 in THIRD ROW SEAT REMOVAL/INSTALLATION ).
  • Page 81 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 63: Detaching Clips And Removing Back Cover Apart From Frame Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Release all of the clips (A) from behind the seat-back (B).
  • Page 82 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 64: Releasing Clips From Behind Seat-Back Courtesy of AMERICAN HONDA MOTOR CO., INC. 6. Lift and pull out the release button (A), and remove the screw (B), then remove the headrest guide (C).
  • Page 83 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 65: Removing Headrest Guide Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 84 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX 7. Pull back the edge of the seat-back cover (A) all the way around, then release all of the clips (B). Remove the seat back cover (C). Fig. 66: Removing Seat Back Cover Courtesy of AMERICAN HONDA MOTOR CO., INC.
  • Page 85 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 67: Replacing Clips Using Upholstery Ring Pliers Courtesy of AMERICAN HONDA MOTOR CO., INC. SEAT CUSHION COVER 1. Remove both front mounting bolts, then lift the seat cushion up (see step 1 in THIRD ROW SEAT REMOVAL/INSTALLATION ).
  • Page 86 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX...
  • Page 87 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 68: Releasing Hook Strips From Under Seat Cushion Courtesy of AMERICAN HONDA MOTOR CO., INC. 4. Pull back the edge of the seat cushion cover (A) all the way around, and release all of the clips (B), then...
  • Page 88 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX Fig. 69: Removing Seat Cushion Cover Courtesy of AMERICAN HONDA MOTOR CO., INC. 5. Install the seat cushion cover in the reverse order of removal, and note these items:...
  • Page 89 2006 Acura MDX 2003-06 ACCESSORIES & EQUIPMENT Seats - MDX To prevent wrinkles, make sure the material is stretched evenly over the pad before securing all the clips. Replace all of the clips fastening the seat-back cover (A) and pad wire (B) with new ones (C) using commercially available upholstery ring pliers (D).