To Clear The Timer Program - Memorex MVD4543OM User Manual

5
Enter two digits for the start hour and two digits for the start
minute using the Number buttons 1. As each number is pressed,
the cursor will move to the right. When finished, the AM/PM
setting will blink. Press the Number 1 button 2 for AM or the
Number 2 button 3 for PM; the End Time hour digits will blink.
NOTE: You can also use the Navigation (π,†) buttons followed
®) button
by the Navigation (
7
Press the Navigation (†) button to cycle through the Tape
Speeds (SP or SLP).
NOTES: 1. Make sure to have a recordable cassette inserted with enough space/time for the program recording.
2. After you have stored the programs, if the programs are overlapping (The recording time on the programs are overlapped).
The PROGRAM OVERLAP menu will appear on the screen temporality and the overlapped programs will flash on the
screen. In this case, you should clear either one of the overlapped program. See below to clear the program.

TO CLEAR THE TIMER PROGRAM

1
Enter the VCR mode and the Setup screen as described on
page 22; the Setup menu will appear. Scroll to Program Set
using the Navigation (†) button 1. Press the OK button 2
to select it; the Program menu will appear.
VCR SETUP MENU (CONTINUED)
2
3
to select between AM and PM.
1
1
2
6
1
Enter two digits for the end hour and two digits for the end
minute using the Number buttons. As each number is
pressed, the cursor will move to the right; the Tape Speed
option will blink.
NOTE: The AM/PM setting will automatically be set.
8
When finished, press the SETUP button 1 to store the program.
"Program has been saved" will appear on screen temporality.
Setting for another program as desired or press the
SKIP n Button 2 to select another program. When finished,
press the SETUP button 1 twice to exit the setup menu.
Turn the unit off or press the SELECT (VCR/DVD) button
(on the main unit) or DVD button (on the remote) 3 to switch
to DVD mode; the Timer indicator will light in the display.
When the actual time matches the timer On time, the unit
will turn on and record as per the program.
NOTES: You can set up to 8 programs for Timer recording.
2
Select the program you want to clear using the Skip n 1 or
|o 2 button. Then press the CLEAR button 3 to clear the
program. When finished, press the SETUP button 4 twice
to exit the VCR setup menu.
24
3
1
2
3
4
2
1