Telephone Directory - Memorex MB123OM Manual

Set password:
Press SET to start password
setting
The first digit is ready for setting
0 Press UP or DOWN to scroll for the digit
0 Press ENTER to confirm the selected value.
0 Press ERASE to edit the previously set digit.
0 After pressing ENTER to confirm the 4th digit, press ENTER
without scrolling
Erase password: g
0 Press erase in password t.
mode,the rubber and I ~
asteriskllashlordecoding a
I
0 Decode the password as described in "Telephone DireckWy
Mode"
C. TELEPHONE DIRECTORY
The telephone directory can store files with at maximum 10
characters for name and 12 digits for telephone number All files
will be sorted in alphanumeric order.
Press MODE to enter into the Telephone Directory "Telephone
Directory" k:on and the first file will be displayed il there is no securi1y
password set belore use Otherwise, you have to enter password
to access the telephone files as follows:
Decode password
0 Press UP or DOWN to select the appropriate digit.
0 Press ENTER to confirm.
oil the confirmed digit or digits are to be readjusted, press ERASE
as the backspace command. Then press another appropriate digit
by pressing UP of DOWN
oAfter confirming selected digits, press ENTER once more and
the uni1 will check the password
oil the selected digi1s do not match the password, the "key" icon
and the asterisk will be shown again and the user is required to
re-enter the password The first file will be displayed when the
password is correct.
Note:
If there are no files, will be displayed at the entry 01 Telephone
Directory mode