Novell ZENWORKS 7.2 LINUX MANAGEMENT - SCENARIOS 2 03-30-2007 Manual page 6

3 : U P G R A D I N G A S L E S 1 0 O R S L E D 1 0 M A N A G E D D E V I C E
Objective:
Verify the functionality of ZENworks Linux Management on a SLES 10 or SLED 10
managed device after upgrading it.
Pre-Requisite:
To test this scenario, you must have the following setup:
A server with ZENworks 7 Linux Management with IR1 installed
A SLES 10 or SLED 10 managed device
Steps:
1. Upgrade the server to ZENworks 7.2 Linux Management. You can use the
same setup as
2. On the managed device, lock any bundle by executing the rug bla
bundle_name command.
3. Upgrade the managed device. For more information, see
ZENworks 7.2 Linux Management Installation
.
Expected Results
The managed device is upgraded to ZENworks 7.2 Linux Management. All the
service associations are retained. All the bundle locks are migrated to the new
version and retained.
After the managed device is successfully upgraded, create a new bundle or a policy
on the server and associate it to this managed device. Verify that it will work.
Scenario 1.
Upgrade
Guide.
in the
6
p.