Novell SERVER CONSOLIDATION MIGRATION TOOLKIT 1.2 - ADMINISTRATION GUIDE 09-2007 Administration Manual page 105

6 (Conditional) If you selected the diskette swap, continue with
automatic copy over the network, skip to
6a To copy the nuwnici.nlm file to the source and destination servers, click Copy NLM
and then click Next.
6b Insert a blank formatted diskette into the floppy drive on the destination server.
6c At the destination server console, enter
load nuwnici -1
6d Remove the diskette from the destination server and insert it into the source server's
floppy drive.
6e At the source server console, enter
load nuwnici -2
This copies the NICI files to the diskette.
6f Remove the diskette from the source server and insert it into the destination server's
floppy drive.
6g At the destination server console, enter
load nuwnici -3
This copies the NICI files to the destination server.
6h Click Next.
TIP: If you get NICI errors when eDirectory tries to load or when you copy the NICI files,
check to see if pki.nlm will load on the destination server. If it won't load, see
Section 12.4.2, "NICI Errors," on page
7 Delete all user connections (except your own) to the source and destination servers, then click
Next.
If you want to first broadcast a logout message to any users logged in to the server, select
Broadcast Logout Message, type the message in the field, and then click OK.
8 Type the passwords for the source and destination trees, then click Next.
9 Resolve any critical errors or warnings on the Migrate NDS/eDir Verification Results screen,
then click Next.
10 Perform the eDirectory step-by-step migration.
The eDirectory migration is divided into several steps. This is for diagnostic purposes. If the
eDirectory migration fails for any reason, you know exactly what step it failed on and can take
the appropriate measures to fix the problem.
For more information on the NDS/eDirectory migration process, including steps to restore the
source and destination servers, see
Failures," on page 115.
10a Click Next.
The first step changes autoexec.ncf and timesync.cfg; modifies the server name
in hosts, hostname, and snmp.cfg; and renames smdr.cfg to smdr.mig. The
first step also renames rootcert.der in both the sys:system and sys:public
directories to rootcert.der.bak.
At the end of the migration process, the source server is brought down and the destination
server reboots and takes over the name and identity of the source server.
Step 7.
114.
Section 12.5, "Recovering from NDS/eDirectory Migration
Step 6a. If you selected the
Migrating Data from NetWare Servers 105