Novell PLATESPIN ORCHESTRATE 2.0.2 - VM CLIENT GUIDE AND REFERENCE 06-17-2009 Client Manual page 23

Discovered (#) is displayed below Virtual Machines, where # represents the number of VMs
that are waiting to be registered with the Orchestrate Server.
2 Click Discovered (#) to display the unregistered VMs in the details section on the right.
You can accept (see
The VMs that you accept become part of your virtualization grid.
3 Accept a discovered VM in one of the following ways:
Select the VM in the details view, then click the
Right-click the VM in the details view, then select Accept.
Select the VM in the details view, then click Actions > Accept.
You can choose to register multiple VMs at a time.
After a VM has been registered, it is listed with its operating system.
It can take a few minutes for this acceptance process to be completed. Do not proceed with
using the VMs until the acceptance process is complete.
4 (Optional) To reject a VM, do one of the following:
Select the VM in the details view, then click the
Right-click the VM in the details view, then select Reject.
Select the VM in the details view, then click Actions > Reject.
The unregistered VM is removed from the Virtual Machines list.
The next time that an unregistered VM attempts to register to the Orchestrate Server, the
rejected VMs are again listed as candidates for acceptance into the datagrid.
If the VM is running, you can tell whether a VM has the Orchestrate Agent installed on it by
whether there are pie charts in its CPU and Memory columns.
Step 3) or reject (see Step 4) any of the listed VMs that were discovered.
button.
button.
Getting Started 23