Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual page 41

Page Name
Advanced
Protocols
Domain Name Service
Time Zone
Time Synchronization
eDirectory Installation
eDirectory Information
Action
1. Click the SLP tab.
2. In the DA Server 1 field, type the IP address of the SLP
Directory Agent (DA), which is the first OES 2 server you
installed in the lab. For example, 192.168.1.100.
3. In the SLP Scope List field, type
4. Click OK.
1. Click Next.
1. Type the DNS hostname associated with the IP address
you just entered.
In contrast to OES 2 servers, this can be different than the
name used in eDirectory. Of course, you can choose to
use the DNS name for NetWare servers in eDirectory in
your production network. In this guide, however, the
eDirectory server name is assumed to be LAB_NW.
2. Type the domain name.
3. Type at least one DNS name server IP address. For
example, 192.168.1.50.
4. Click Next
1. Click the correct time zone for your area.
2. Click Advanced.
1. Leave the protocol set to Timesync.
2. Click Use Configured Sources.
3. In the Time Source 1 field, type the IP address of the same
reliable time source you specified for the OES 2 lab server
(not the VM host server).
4. Select NTP.
5. Click OK.
6. Click Next.
1. Click Next.
1. Click the Tree icon.
2. Browse to and select EXAMPLE_TREE.
3. Click OK.
4. Click the browse icon to the right of the Context for Server
Object field.
5. Browse to and select SERVERS (in COMPANY > LAB).
6. Click OK.
7. Click Next.
.
Directory
Installing a NetWare Virtual Machine 41