Novell OPEN ENTERPRISE SERVER 2 SP2 - LAB GUIDE 01-19-2010 Manual page 40

Page Name
NetWare Installation
Choose a Pattern
Components
Novell iManager 2.7.2
Summary
Server Properties
Protocols
40 OES 2 SP2: Lab Guide for Linux and Virtualized NetWare
Action
1. Click inside the installation window to set the mouse
pointer.
The mouse is not used on the first few screens, but you
must set it now. Otherwise, the mouse and the keyboard
might not work as expected when the GUI pages appear.
2. Use the arrow keys to select a language, then press Enter.
3. Modify the Regional Settings if desired, then select
Continue and press Enter.
4. Press F10 twice to accept the license agreements.
5. Press the Down-arrow key to select Continue, then press
Enter.
6. Press Enter to
Create an 8 GB SYS: volume.
Begin copying files for the installation.
As the files copy, notice the Run, Pause, and Shutdown
options above the window displaying the installation. After
the server is installed, they are activated, and you can then
use them to manage the state of the virtual machine.
1. Click Next.
At the start of the installation you set the mouse pointer
inside the window boundary. To free the mouse to move
outside the window, press Ctrl+Alt. To start working in the
window again, click inside it to set the pointer.
1. Select
Apache 2 Web Server and Tomcat 4 Servlet
Container
Tomcat 5 Servlet Container
Novell iManager 2.7.2
2. Click Next.
1. Click Yes.
1. Click Copy Files.
1. Type for the server name.
LAB_NW
2. Click Next.
1. Click IP.
The installation process accesses the server.
2. Click the first IP Address field, then type the IP address of
the server. For example, 192.168.1.130.
3. Type the subnet mask for the address. For example,
255.255.255.0.
4. Type the router (gateway) address for the subnet. For
example, 192.168.1.1.
5. Click Advanced.