Novell LINUX ENTERPRISE SERVER 11 - SECURITY Manual page 42

and set up slave servers in the subnets as described in
a NIS Slave Server"
3.1.1 Configuring a NIS Master Server
To configure a NIS master server for your network, proceed as follows:
1 Start YaST > Network Services > NIS Server.
2 If you need just one NIS server in your network or if this server is to act as the
Figure 3.1 NIS Server Setup
3 Determine basic NIS setup options:
28 Security Guide
(page 32).
master for further NIS slave servers, select Install and Set Up NIS Master Server.
YaST installs the required packages.
TIP
If NIS server software is already installed on your machine, initiate the
creation of a NIS master server by clicking Create NIS Master Server.
3a Enter the NIS domain name.
Section 3.1.2, "Configuring