Table of Contents
Advertisement
Procedure 6.4 Restore a Virtual Machine's Current State (Virtual Machine
1 Make sure the virtual machine to be restored has not been started since you ran
2 Run Virtual Machine Manager.
3 Select the hypervisor that should restore the virtual machine. On the local machine,
4 In Virtual Machine Manager, click File > Restore Saved Machine from the drop-
5 Specify the previously-saved file.
6 Click Open.
Procedure 6.5 Restore a Virtual Machine's Current State (xm Command)
1 Make sure the virtual machine to be restored has not been started since you ran
2 In the host environment, enter xm restore state-file where
6.17 Virtual Machine States
A virtual machine's state can be displayed in Virtual Machine Manager or by viewing
the results of the xm list command, which abbreviates the state using a single char-
acter.
• r - running - The virtual machine is currently running and consuming allocated
resources.
72
Virtualization with Xen
Manager)
the save operation.
this is localhost.
down menu.
The virtual machine and the guest operating system are restored to the previously-
saved state.
the save operation.
state-file is the previously-saved memory-state file.
Advertisement
Table of Contents
