Novell LINUX ENTERPRISE SERVER 10 SP2 - STORAGE ADMINISTRATION GUIDE 05-15-2009 Administration Manual page 83

5d Specify values for Configuration Options by changing the following default settings as
desired.
For RAIDs 1, 4, or 5, optionally specify a device to use as the spare disk for the
RAID. The default is none.
For RAIDs 0, 4, or 5, specify the chunk (stripe) size in KB. The default is 32 KB.
For RAIDs 4/5, specify RAID 4 or RAID 5 (default).
For RAID 5, specify the algorithm to use for striping and parity. The default is Left
Symmetric.
For information about these settings, see "Configuration Options for RAIDs" on page
Managing Software RAIDs with EVMS
78.
83