Z/Vm Installation - Novell LINUX ENTERPRISE SERVER 10 SP2 - STARTUP GUIDE 05-08-2008 Startup Manual

5 Configure the network.
6 Choose a type of connection to the installation system (SSH, X, or VNC) and
7 Start the basic installation with YaST.
8 Perform the first IPL of the installed system.
9 Reconnect to the installation system and start YaST to continue the installation

6.2 z/VM Installation

26 Start-Up Guide
establish the connection.
process and configure SUSE Linux Enterprise Server.
1 Choose a suitable IPL option for the initial IPL before installing. For the in-
stallation in z/VM, choose VM Reader or Tape.
2 Make the installation media or their data available in the network using FTP
or SMB and ensure that the paths can be accessed by YaST.
3 Create a Linux guest in z/VM, assigning its memory allowance and defining
the desired network connection.
4 Choose one of the following:
• Transfer the VM reader kernel, the parmfile, and the initial RAM disk
using FTP to a minidisk accessible to the guest in z/VM and create a
REXX start-up script for the IPL of the VM reader.
• Transfer the tape IPL kernel, the parmfile, and the initial RAM disk using
FTP to a minidisk accessible to the guest in z/VM and transfer these files
to the tape using, for example, a REXX script.
5 Perform the IPL of the installation system.
6 Configure the network.