Novell LINUX ENTERPRISE SERVER 10 SP2 - ARCHITECTURE-SPECIFIC INFORMATION Supplementary Manual page 41

Example A.3 Network Device Name
Automatic configuration via DHCP?
1) Yes
2) No
> 2
Enter your IP address> 192.168.0.20
Enter your netmask. For a normal class C network, this is usually
255.255.255.0 [255.255.255.0]> 255.255.255.0
If you need a gateway to reach the server, enter the IP address of the
gateway. If you do not need a gateway, enter your own IP address
[192.168.0.20]> 192.168.0.1
Enter the IP address of your name server. If you do not use a name server,
press ESC [192.168.0.20]> 192.168.0.2
A.1.2 Gigabit Ethernet with the qeth Module
Select 1 from the list of network devices for OSA network adapters, then 1 for the
QDIO interface, then 1 for ethernet. When prompted, enter the network device's read,
write, and data channel numbers (for example, 0.0.0808, 0.0.0809, and
0.0.080a) and the port name, if applicable. Choose whether to enable OSI Layer 2
support.
Example A.4 Network Device Driver Parameters
Device address for read channel> 0.0.0808
Device address for write channel> 0.0.0809
Device address for data channel> 0.0.080a
Portname to use> SUSEPORT
Enable OSI Layer 2 support?
1) Yes
2) No
> 2
Appendix 31