Sony KLV-40V400A Service Manual

Lcd color tv

Hide thumbs Also See for KLV-40V400A:

Brochure (2 pages)

Operating instructions manual (40 pages)

page of 85

/ 85
Bookmarks

Quick Links

Download this manual

REVISION HISTORY

MODEL

KLV-40V400A

KLV-46V400A

NO.

SUFFIX

DATE

-01

2008/6

-02

2008/7

PART NO. :

SUPP / CORR

DESCRIPTION

_ _

1st Issue

Supp-1

New model addition KLV-40V400A/1

EG1L(GA)

9-872-997-02

CHASSIS

(Pg

34)

Need help?

Do you have a question about the KLV-40V400A and is the answer not in the manual?

Questions and answers

Summary of Contents for Sony KLV-40V400A

Page 1 REVISION HISTORY EG1L(GA) CHASSIS MODEL 9-872-997-02 PART NO. : KLV-40V400A KLV-46V400A SUFFIX DATE SUPP / CORR DESCRIPTION 2008/6 1st Issue 2008/7 Supp-1 New model addition KLV-40V400A/1...
Page 2 SERVICE MANUAL EG1L(GA) CHASSIS MODEL COMMANDER DEST. MODEL COMMANDER DEST. KLV-40V400A RM-GA011 E, EA, Egypt, India, Iran, ME, Thailand, Phillipines, Saudi Arabia, South Africa, Vietnam KLV-46V400A RM-GA011 E, EA, India, Iran, ME, Thailand, Phillipines, Saudi Arabia, South Africa, Vietnam RM-GA011...
Page 3 6-5. Semiconductor ............... 21 1-6. Caution ................5 7. EXPLODED VIEWS 2. SELF DIAGNOSTIC FUNCTION 7-1. KLV-40V400A ............... 22 2-1. Overview of Control Buttons .......... 6 7-1-1. Rear Cabinet and Stand Assy ......22 2-2. LED Display Specification ..........6 7-1-2.
Page 4 Point them out to the customer and OPERATION. REPLACE THESE COMPONENTS WITH recommend their replacement. SONY PARTS WHOSE PART NUMBERS APPEAR AS 6) Check the line cords for cracks and abrasion. SHOWN IN THIS MANUAL OR IN SUPPLEMENTS Recommend the replacement of any such line cord to the PUBLISHED BY SONY.
Page 5 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com – 4 –...
Page 6 KLV-40,46V400A RM-GA011 1-6. Cauton CAUTION Attachment of HIROSE MDF 61 connector 1. Insertion (2) Press the center of (3) Slide the (1) Hold the center the connector to insert slider to lock the of a connector connector Lock Detachment of HIROSE MDF61 connector 2.
Page 7 KLV-40,46V400A RM-GA011 SECTION 2 SELF DIAGNOSTIC FUNCTION 2-1. Overview of Control Buttons 2-4. LED Pattern When safety shutdown occurs, Standby LED display reports the cause by using the lightning patterns as indicated below. MENU TV/VIDEO VOLUME PROG POWER 2.0 sec 2.0 sec 0.3 sec 0.3 sec...
Page 8 KLV-40,46V400A RM-GA011 2-5. Standby LED Error Display Perform below countermeasures according to Standby LED blinking times. Blinking times Error Countermeasure DC_DET (12V Main Voltage) Replace either/both z BG1 board z IP5 board DC_ALERT 1 Replace BG1 board. DC_ALERT 2 Replace BG1 board. DC_ALERT 3 Replace BG1 board.
Page 9 KLV-40,46V400A RM-GA011 SECTION 3 DISASSEMBLY 3-1. Rear Cover Removal (KLV-40V400A) (KLV-46V400A) Two screws Two screws Two screws (+BVTP 3 X 12) (+BVTP 3 X 12) Two screws (PSW 5 X 8) Two screws Two screws (PSW 5 X 8) (+PSW M3 X 5)
Page 10 KLV-40,46V400A RM-GA011 3-4. BG1 Board Removal (KLV-40V400A) (KLV-46V400A) 1 Six screws 1 Six screws (+PSW 3SG) (+PSW 3SG) 2 One connector 2 One connector 3 One connector 4 IP5 board 3 One connector 4 IP5 board 3-5. IP5 Board Removal...
Page 11 KLV-40,46V400A RM-GA011 3-7. H4, H3 and Speaker Removal (KLV-40V400A) (KLV-46V400A) 1 Four screws 1 Four screws (+BVTP 3 X 12) (+BVTP 4 X 12) 3 Loudspeaker (5.5 X 12cm) 3 Loudspeaker (5.5 X 12cm) 2 Four screws 4 One screw...
Page 12 --> avoid disconnection of wires. 2. Make sure wires are kept away from sharp edges, heatsinks & other high-temperature parts. Slide Clamp Hook 4-1.(KLV-40V400A) 4-1-1. Wire dressing overview 4-1-2. Dress LVDS cable with Sheet Core C & Shield Tape as shown Datum Datum...
Page 13 KLV-40,46V400A RM-GA011 4-1-5. Dress Connector Assy 14P+20P & Speaker Wire with sheet core C(2X) as shown Sheet Core C Follow White Datum UL tape Datum as guide to Connector assy apply tape 14P+20P Speaker Wire 4-1-6. Dress Connector Assy 14P+20P & Speaker wire with sheet core C(3X) as shown. Datum Sheet Core C Datum...
Page 14 KLV-40,46V400A RM-GA011 4-1-9. 1) Ground Wire and Speaker Wire 2) Screw Gound wire and dress underneath speaker wire as shown. Ground Wire Speaker Wire 4-6-2. Dress speaker wire with LCD tape as shown Ground Wire Ground Wire Speaker Wire Datum LCD Tape 4-1-10.
Page 15 KLV-40,46V400A RM-GA011 4-2.(KLV-46V400A) 4-2-1. OVERALL VIEW 4-2-2. Dress LVDS 1) Dress LVDS cable with Sheet Core C(2X) & Shield Tape as shown in figure A. 2) Dress LVDS cable with Sheet Core C on spine frame as shown in figure B. 3) Screw LVDS cable's clamp on main bracket as shown in figure C.
Page 16 KLV-40,46V400A RM-GA011 4-2-3. Dress Connector Assy 4-2-4. Dress Connector Assy Dress Connector Assy 14P+20P Dress Connector Assy 14P+20P & Speaker wire with sheet & Speaker Wire with sheet core C(2X) as shown in figure D. core C(4X) as shown in figure E & F. Figure E Datum Sheet Core C...
Page 17 KLV-40,46V400A RM-GA011 4-2-6. Speaker Wire 1) Screw Ground wire and dress underneath speaker wire as shown in figure I,J&K. Figure J 2) Dress speaker wire with LCD tape as shown in figure K. Ground Wire Speaker Wire Ground Wire Ground Wire Speaker Wire Figure I LCD Tape...
Page 18 KLV-40,46V400A RM-GA011 4-2-8. Dress Inverter Wire and Dress Connector Assy 1) Dress inverter wire with Sheet Core E as shown in figure N. 2) Dress Connector assy 7P with LCD tape as shown in figure O Caution: Keep Inverter wire away from spine frame's sharp edge area Inverter wire Lock the connector...
Page 19 KLV-40,46V400A RM-GA011 SECTION 5 SERVICE ADJUSTMENTS 5-1. Accessing Diagnostic Menu 3. Press V/v to select ‘Service’. Service Menu 1. While TV set on standby, press the following sequence on Status the remote commander (RM-GA011). Service On screen Figure 4 Channel 5 POWER Volume (-) display...
Page 20 KLV-40,46V400A RM-GA011 3. Press V/v to select ‘Service’. 3. Press B/b or to view ‘W/B’. Service Menu Service Menu Status Status Service Service Figure 8 Figure 12 4. Then press B/b or to view ‘Service’ category items. 4. Then press B/b or to view ‘W/B’...
Page 21 Complete board replacement is required if service is necessary. 6-2. CIRCUIT BOARD LOCATION Switch Unit Switch Unit IP5 Board IP5 Board BG1 Board BG1 Board H4 Board H4 Board H3E Board H3E Board KLV-40V400A KLV-46V400A – 20 –...
Page 22 KLV-40,46V400A RM-GA011 6-3. SCHEMATIC DIAGRAM 6-4. PRINTED WIRING BOARDS Board Function Note I/O/Audio/VCTP/DDR/HDMI/ Due to complexity of the board, performing DC-DC Converter/Tuner/Sub component level field repairs are not Croma/STBY Micro recommended. Complete board replacement is required if service is Power Supply necessary.
Page 23 SCREW, +PWH M5X16 3-873-013-01 SCREW, +PWH M5X10 7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3 2-580-608-01 SCREW +PSW M5X16 7-1. (KLV-40V400A) m 2-596-649-01 +KTT 3X10 (5 TYPE) 7-1-1. REAR CABINET AND STAND ASSY 2-580-607-01 SCREW, +PSW M5X12 REF. NO. PART NO. DESCRIPTION...
Page 24 KLV-40,46V400A RM-GA011 7-1-2. FRAME AND COVER REF. NO. PART NO. DESCRIPTION REMARK 1-480-709-11 SWITCH UNIT X-2318-678-1 BRACKET SIDE JACK ASSY (PF1) – 23 –...
Page 25 KLV-40,46V400A RM-GA011 7-1-3. CHASSIS-1 REF. NO. PART NO. DESCRIPTION REMARK A-1511-380-D IP5-40S COMPL (STT) (ME, Phillipines, South Africa, Thailand) A-1511-388-D IP5-40S COMPL (SOEM) (except ME, Phillipines, South Africa, Thailand) A-1543-889-A BG1 MOUNT (SERVICE) 1-821-909-11 AC INLET 3-293-964-01 BRACKET, AC INLET –...
Page 26 KLV-40,46V400A RM-GA011 7-1-4. H3E & H4 BOARDS AND SPEAKER REF. NO. PART NO. DESCRIPTION REMARK * A-1530-492-A H4 MOUNT * A-535-202-A H3E MOUNT 1-826-889-12 LOUDSPEAKER (5.8X12.6CM) 1-826-889-22 LOUDSPEAKER (5.8X12.6CM) * 3-290-361-02 GUIDE, LIGHT – 25 –...
Page 27 KLV-40,46V400A RM-GA011 7-1-5. BEZEL ASSY AND LCD PANEL REF. NO. PART NO. DESCRIPTION REMARK X-2190-988-1 BEZEL ASSY (40AM) 1-802-652-12 LCD PANEL (40 FHD TFT) * 3-289-965-01 PANEL, CLEAR (40) – 26 –...
Page 28 KLV-40,46V400A RM-GA011 7-2. (KLV-46V400A) 7-2-1. REAR CABINET AND STAND ASSY REF. NO. PART NO. DESCRIPTION REMARK * 3-106-086-01 COVER, ECS X-2189-411-2 STAND(L)ASSY 2-635-749-11 EMBLEM, SONY NO.9 – 27 –...
Page 29 KLV-40,46V400A RM-GA011 7-2-2. FRAME AND COVER REF. NO. PART NO. DESCRIPTION REMARK 1-480-709-11 SWITCH UNIT X-2318-678-1 BRACKET, SIDE JACK ASSY (PF1) – 28 –...
Page 30 KLV-40,46V400A RM-GA011 7-2-3. CHASSIS-1 REF. NO. PART NO. DESCRIPTION REMARK A-1511-381-D IP5-46 COMPL (STT) (ME, Phillipines, South Africa, Thailand) A-1511-389-D IP5-46 COMPL (SOEM) (E, EA, India, Iran, Saudi Arabia, Vietnam) A-1543-889-A BG1 MOUNT (SERVICE) 1-821-909-11 AC INLET 3-293-964-01 BRACKET, AC INLET –...
Page 31 KLV-40,46V400A RM-GA011 7-2-4. H3E & H4 BOARDS AND SPEAKER REF. NO. PART NO. DESCRIPTION REMARK * A-1530-492-A H4 MOUNT * A-1535-202-A H3E MOUNT 1-826-890-12 LOUD SPEAKER (6.5X15CM) 1-826-890-22 LOUD SPEAKER (6.5X15CM) * 3-290-361-02 GUIDE, LIGHT – 30 –...
Page 32 KLV-40,46V400A RM-GA011 7-2-5. BEZEL ASSY AND LCD PANEL REF. NO. PART NO. DESCRIPTION REMARK X-2190-776-1 BEZEL ASSY (46AM) 1-802-650-14 LCD PANEL (46 INCH FHD TFT) * 3-293-434-01 PANEL, CLEAR (46) – 31 –...
Page 33 B, unless otherwise COILS confidential information. Strictly follow the noted. • MMH : mH, UH : µH instructions whenever the components are repaired and /or replaced. (KLV-40V400A) REF NO. PART NO. DESCRIPTION REMARK REF NO. PART NO. DESCRIPTION REMARK...
Page 34 KLV-40,46V400A RM-GA011 The components identified by mark contain The components identified by shading confidential information. Strictly follow the and mark ! are critical for safety. instructions whenever the components are Replace only with part number specified. repaired and /or replaced. REF NO.
Page 35 SUBJECT : New model addition KLV-40V400A/1 Note: This Supplement shows only Variant information for the new model(s). Other information remains the same as original issue for KLV-40V400A. SECTION 3 DISASSEMBLY 3-1. R2 board and Rear Cover Removal (refer page 8)
Page 36 SECTION 5 SERVICE ADJUSTMENT Preset "Test" button on remote commander 6. The following menu appears on the screen. Function Settings 1. Press the following buttons simultaneously on the remote commander RM-GA011 for a few seconds. Hotel Mode TV / Remote Controls Both Controls Freeze Display Key...
Page 37 DIAGRAMS 6-2. Circut Board Location (refer page 20) R2 Board Switch Unit IP5 Board BG1 Board H4 Board H3E Board (KLV-40V400A/1) 6-3. SCHEMATIC DIAGRAM & PRINTED WIRING BOARDS R2 Board (refer page 21) Board Function Note Hotel Mode Due to complexity of the board, performing component level field repairs are not recommended.
Page 38 SECTION 7 EXPLODED VIEW 7-1. (KLV-40V400A) 7-1-1. Rear Cabinet and Stand Assy (refer page 22) 7-685-649-71 SCREW +BVTP 3X14 TYPE2 IT-3 REF. NO. PART NO. DESCRIPTION REMARK * A-1565-554-A R2, MOUNT * 4-111-643-01 R BRACKET (TOP) – 37 –...
Page 39 7-1-3. CHASSIS-1 REF. NO. PART NO. DESCRIPTION REMARK A-1565-610-A BG1 MOUNT (SERVICE) – 38 –...
Page 40 For part number information refer to the Exploded View or Electrical Parts List section of this Service Manual. ********************************************************************** CONNECTORS ************** * 1-910-049-38 CONNECTOR ASSY, 6P (CN001(R2)-CN9003(BG1) (1) Sony Corporation Sony EMCS (Malaysia) Sdn. Bhd. English 9-872-997-02 TV Operations of Pan Asia  2008.7 – 39 –...
Page 42 Introduction Trademark information Thank you for choosing this Sony product. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of Before operating the TV, please read this manual HDMI Licensing LLC. thoroughly and retain it for future reference.
Page 43 Table of Contents Using MENU Functions Start-up Guide Navigating through menus......22 Checking the accessories ......4 Using the Favourite List ......23 Inserting batteries into the remote....4 Settings adjustment ........24 1: Attaching the stand .........4 Picture menu ........... 26 Sound menu ..........
Page 44 Start-up Guide Checking the 1: Attaching the stand accessories For KLV-46V400A/KLV-40V400A AC power cord* (KLV-46/40V400A only) Stand (1) and screws (3) (KLV-32V400A) Stand (1) and screws (4) (KLV-46/40V400A) Remote RM-GA011 (1) Size AA batteries (R6 type) (2) * For models with ferrite cores, do not remove these cores.
Page 45 For KLV-32V400A 2: Connecting an antenna/cable/VCR Connecting an antenna/cable Antenna cable (not supplied) Connecting an antenna/cable and VCR Place the TV onto the stand by aligning the screw hole alignment lines over the stand as shown. Fix the TV to the stand according to the Antenna cable arrow marks that guide the screw holes...
Page 46 3: Preventing the TV 4: Bundling the cables from toppling over 5: Connecting the AC power cord Install a wood screw (4 mm in diameter, not supplied) in the TV stand. Install a machine screw (M5 x 12, not supplied) into the screw hole of the TV. Tie the wood screw and the machine screw with a strong cord.
Page 47 Press to select the language displayed 6: Performing the initial on the menu screens, then press set-up English Press to select the country/region, then press Select country • Area 1: Asia (except Philippines), Middle East, Africa and Oceania. • Area 2: Philippines. Press to select “Home”, then press 3, 4, 5, 6, 9,...
Page 48 When the “Programme Sorting” menu Watching TV appears on the screen, follow the steps of “Programme Sorting” (page 33). If you do not change the order in which the channels Press 1 on the top edge of the TV to turn are stored on the TV, go to step 8.
Page 49 TV’s weight. For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors.
Page 50 • Two or more people are needed to – Use only Sony supplied AC power cords, not those of transport a large TV set. other brands. • When transporting the TV set by –...
Page 51 TV set from moving or slipping off from immediately if any of the following problems occur. its table stand. Ask your dealer or Sony service centre to have it checked by qualified service personnel. Optional Equipment...
Page 52 • Control for HDMI (BRAVIA Sync) is only available with the connected Sony equipment that has the BRAVIA Sync logo or is compatible with control for HDMI. • If you turn the TV off, Theatre Mode is also turned off.
Page 53 – Favourite list Displays the Favourite list that you have specified (page 23). qs PROG +/–/ • Selects the next (+) or previous (-) channel. • In Text mode: Selects the next ( ) or previous ( ) page. – Previous channel Returns to the previous channel watched (for more than five seconds).
Page 54 For TV, Video, HD/DVD, HDMI or DIGITAL MEDIA PORT (except PC input) Wide Zoom* Enlarges the centre portion of the picture. The left and right edges of the picture are stretched to fill the 16:9 screen. Normal Displays the 4:3 picture in its original size. Side bars are shown to fill the 16:9 screen.
Page 55 Using the Tools menu Press TOOLS enables you to access various viewing options and change/make adjustments according to the source and screen mode. The options displayed vary depending on the input source. Viewing TV programme Viewing connected equipment Options Description Options Description Picture Mode...
Page 56 Overview of the TV buttons and indicators Displays or cancels the menu. – Input select / OK • Displays the connected equipment list and selects the input source (page 18). • In TV menu: Selects the menu or option, and confirms the setting.
Page 57 Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV. For service use only Audio system DVD player PC (HDMI output) S VHS/Hi8/ camcorder Blu-ray disc player Headphones Digital video camera DMPORT DIGITAL MEDIA PORT adaptor Hi-Fi audio...
Page 58 720p (50/60 Hz), 1080i (50/60 Hz), 1080p (50/60 Hz) and 1080/24p. • Be sure to use only an HDMI cable that bears the HDMI logo (recommended Sony HDMI cable). • When connecting an audio system with HDMI jack, be sure to also connect to the...
Page 59 Jacks/ Description Input symbol on screen J DMPORT You can play audio or video (optional cable required) of a portable audio player that is connected to the TV using a DIGITAL MEDIA PORT adaptor. DMPORT Depending on the connected DIGITAL MEDIA PORT adaptor, you can operate the connected equipment using the TV as follows;...
Page 60 Viewing Twin Picture Viewing PIP (Picture in Picture) You can view two pictures (external input and TV programme) on the screen simultaneously. Connect the optional equipment (page 17), and make You can view two pictures (PC input and TV sure that images from the equipment appear on the programme) on the screen simultaneously.
Page 61 • Adjusts the volume (2 +/–) and mutes the sound (%) of a connected audio system. • You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing: –...
Page 62 Using MENU Functions Navigating through menus “MENU” allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. Press MENU. Press to select an option, then press To exit the menu, press MENU.
Page 63 Using the Favourite List The Favourite feature lets you select programmes from a list of up to 16 favourite channels that you specify. Press MENU. Press to select “Favourites”, then press Perform the desired operation as shown in the following table or displayed on the screen.
Page 64 Auto Wide “Auto Wide”: “On” t “Off” 4:3 Default Display Area Full Pixel “4:3 Default”: “Wide Zoom” t “Normal” t “Off” Horizontal Shift “Display Area”: “Full Pixel” t “Normal” (KLV-46V400A/KLV-40V400A Vertical Shift Vertical Size only) “Horizontal Shift” “Vertical Shift” “Vertical Size”...
Page 65 Set-up menu (page 29) Set-up “Auto Start-up” Auto Start-up Language English “Language”: “English” t “ ” (Chinese) t “ ” (Thai) t “ ” Cinema Drive AV Set-up (Arabic) t “ ” (Persian) HDMI Set-up Timer Settings “Cinema Drive”: “Auto” t “Off” Standard Power Power Saving Light Sensor...
Page 66 Picture menu Press MENU and select “Settings”. Make sure the “Picture” icon ( ) is selected, then press Picture Mode Selects the picture mode except for PC input source. “Vivid”: For enhanced picture contrast and sharpness. “Standard”: For standard picture. Recommended for home entertainment. “Cinema”: For optimum picture quality of film videos.
Page 67 Sound menu Press MENU and select “Settings”. Press to select the “Sound” icon ( ), then press Sound Mode “Dynamic”: Enhances treble and bass. Recommended for home entertainment. “Standard”: For standard sound. “Clear Voice”: Makes voice sound clearer. Reset Resets all the “Sound” settings except “Sound Mode” and “Dual Sound” to the factory settings.
Page 68 Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. The selection varies, depending on the Broadcasting. Broadcasting Selection NICAM stereo Stereo (stereo sound) Mono (regular sound) NICAM bilingual Main (main sound) Sub (sub sound) Mono (regular sound) NICAM monaural Main (main sound) Mono (regular sound)
Page 69 “Full Pixel”: Displays the picture for 1080/50i, 1080/60i, 1080/50p and 1080/60p (KLV-46V400A/ sources (HDMI or component input only) or 1080/24p sources (HDMI input only) KLV-40V400A only) in the original size when parts of the picture are cut off. “Normal”: Displays the recommended picture area.
Page 70 HDMI. When set to “On”, the following menu items can be performed. If the specific Sony equipment that is compatible with control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI”...
Page 71 Timer Settings Sets the timer to turn on/off the TV. Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the “Sleep Timer” is activated, the (Timer) indicator on the TV front panel lights up in amber.
Page 72 PC Settings menu Press MENU and select “Settings”. Press to select the “PC Settings” icon ( ), then press Wide Mode Selects a screen mode for displaying input from your PC, see page 14. “Full 1”: Enlarges the picture to fill the display area, keeping its original horizontal- to-vertical aspect ratio.
Page 73 Channel Set-up menu Press MENU and select “Settings”. Press to select the “Channel Set-up” icon ( ), then press 1 Digit Direct When “1 Digit Direct” is set to “On”, you can select a channel using one preset number button (0 - 9) on the remote. •...
Page 74 Manual Programme Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Colour System”/“Signal Booster”, press PROG +/- to select the programme number with the channel. You Preset cannot select a programme number that is set to “Skip” (page 34). Programme/TV System/VHF or UHF Presets programme channels manually. Select “Programme”, then press Press to select the programme number you want to manually tune...
Page 75 Additional Information Specifications Model name KLV-46V400A KLV-40V400A KLV-32V400A System Panel System LCD (Liquid Crystal Display) Panel TV System B/G, I, D/K, M Colour System PAL, PAL60, SECAM, NTSC4.43, NTSC3.58 Channel Coverage B/G: VHF: E2 to E12/ UHF: E21 to E69/ CATV: S01 to S03, S1 to S41...
Page 76 If you find any problem while viewing your TV, you can either check the Troubleshooting guide below or use the “Factory Settings” function (page 31). If the problem persists, contact your Sony dealer. Check whether the 1 (standby) indicator is flashing in red.
Page 77 • The antenna connection is loose or the antenna cable is damaged. Check the cable and connection on the TV, VCR, and on the wall (page 5). switches on and off, or is • Adjust the antenna direction for the minimum interference. Contact a Sony dealer distorted; the sound switches for advice.
Page 78 • The antenna connection is loose or the antenna cable is damaged. Check the cable and connection on the TV, VCR, and on the wall (page 5). • Adjust the antenna direction. Contact a Sony dealer for advice. • Signal transmission is too low. Try using a booster.
Page 79 Customer support Printed in Malaysia...
Page 80 KDL-46D3100 KLV-37S400A KDL-46V3100 KLV-37S310A KLV-46D300A KDL-32D3100 KLV-46V400A KDL-32S3100 KDL-40D3100 KDL-32V3100 KDL-40V3100 KLV-32D300A KLV-40D300A KLV-32S400A KLV-40S400A KLV-32S310A KLV-40S310A KLV-32V400A KLV-40V400A KLV-32V400B KDL-37S3100 Installing the Wall-Mount Bracket 3-214-128-14(1) © 2007 Sony Corporation...
Page 81 To Customers: Step 1: Checking the parts For product protection and safety reasons, Sony strongly required for the recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it installation yourself.
Page 82 TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. Table-Top Stand Soft cloth For KLV-46V400A/KLV-40V400A Table-Top Stand Soft cloth For KDL-32D3100/KDL-32S3100/KDL-32V3100/ KLV-32D300A/KLV-32S310A Table-Top Stand...
Page 83 Referring to the Screw and Hook locations Adjust the angle of the Mounting Hook diagram/table on last page, determine the using the supplied hexagon wrench. screw positions, and secure the Mounting When installing the TV parallel to the wall (0 degrees), Hook to the rear of the TV.
Page 84 Length for each mounting angle/ Display Screen centre Model Name/ dimension/ dimensions/ Angle (0 Angle (20 KLV-46V400A 1120 KLV-46D300A/KDL-46D3100/ 1114 KDL-46V3100 KLV-40S400A KLV-40V400A KLV-40D300A/KDL-40D3100/ KDL-40V3100 KLV-40S310A KLV-37S400A KLV-37S310A/KDL-37S3100 KLV-32S400A KLV-32V400A/KLV-32V400B KLV-32D300A/KDL-32D3100/ KDL-32V3100 KLV-32S310A/KDL-32S3100 Installation dimensions may differ according to how the TV is installed.
Page 85 * Hook position “a” cannot be used for the models in the table below. Screw Hook location location Model Name KLV-46V400A d, g KLV-46D300A/KDL-46D3100/KDL-46V3100 e, g KLV-40S400A/KLV-40V400A d, g e, g KLV-40D300A/KDL-40D3100/KDL-40V3100/KLV-40S310A d, g KLV-37S400A e, g KLV-37S310A/KDL-37S3100 e, g KLV-32S400A/KLV-32V400A/KLV-32V400B...

This manual is also suitable for:

Klv-46v400a