Download Print this page

Setting Up The Iscsi Initiator To Use The Isns Server - Novell INTERNET STORAGE NAME SERVICE 1.0 - ADMINISTRATION Manual

Table of Contents

4 Repeat

2.2.7 Setting Up the iSCSI Initiator to Use the iSNS Server

Do the following for each iSCSI initiator server that should use the iSNS server:

1 At the console on the iSCSI initiator server, log in as the root user, then open a terminal

2 At the terminal console prompt, enter

iSNS for Linux Administration Guide

Step 3

for as many discovery domains as you want to add to the discovery domain set,

then click Done.

A discovery domain can belong to more than one discovery domain set.

console.

iscsiadm --mode discovery --type isns --portal isns_server_ip_addr

Replace isns_server_ip_addr with the IP address of the iSNS server. For example, if the IP

address of the iSNS server is 10.10.10.200, enter

iscsiadm --mode discovery --type isns --portal 10.10.10.200

Table of Contents

Do you have a question about the INTERNET STORAGE NAME SERVICE 1.0 - ADMINISTRATION and is the answer not in the manual?