Novell IDENTITY MANAGER DRIVER FOR ID PROVIDER 3.6.1 - IMPLEMENTATION Manual page 18

ID Policy Repository
The ID policy repository parameters contain information about the location and how to access any
ID policies.
ID Policy Repository
Table 3-1
Parameter
LDAP Server
LDAP Port
Use SSL
Always trust
Policy Container DN
Client Options
The client options are for the ID Provider clients. For more information, see
"Configuring ID Clients," on page
Client Options
Table 3-2
Parameter
Client name
18 Identity Manager 3.6 ID Provider Driver Implementation Guide
Default Value
127.0.0.1
636
True
True
LDAP DN for the policy
container under the driver
object. For example cn=id-
policies,cd=id-
provider,cn=driverset1,dc=idm,
dc=services,dc=system.
23.
Default Value Description
ID-Provider Driver This is the name the driver uses when it acts as an
ID client and requests and ID from the provider. This
is useful for tracing and if access control is enabled
on any of the ID policies.
If access control is enabled, a list of ID client names
can be specified that are allowed to obtain an ID
from the policy. If the client name associated with the
request is not in that list, the provider does not issue
an ID.
Description
The IP address or DNS name of the LDAP
server holding the ID policies
The TCP port that the LDAP server listens
on.
The value is usually 389 for non-SSL
connections and 636 for SSL connections.
Specify whether or not you want to use
SSL.
Specify whether or not you want to trust all
servers. If this option is set to True, the ID
provider trusts all LDAP servers even if the
server certificate is untrusted.
Specify or browse to the DN of the policy
container in your tree. The policy container
can only be created under the ID Provider
driver.
Chapter 4,