Novell GROUPWISE 7 - WEB ACCESS Manual page 6

53.2 Installing Additional WebAccess
Components
The following sections assume that you have installed at least one WebAccess Agent and one
WebAccess Application (or WebPublisher Application) and now need to install additional agents or
applications.
53.2.1 Installing Additional Components on NetWare or
Windows
For more information, see
GroupWise 7 Installation
Installing a NetWare or Windows WebAccess Agent
1 Insert the GroupWise 7 Administrator for NetWare/Windows CD into the CD drive to start the
2 Click Yes to accept the license agreement and display the Select Components dialog box.
3 Deselect all components except the GroupWise WebAccess Agent, then click Next.
4 Follow the prompts to create the WebAccess Agent's gateway directory, install the WebAccess
5 When installation is complete, you need to configure your system so that the WebAccess and
Installing a NetWare or Windows WebAccess or WebPublisher Application
To install a WebAccess Application or a WebPublisher Application to a Web server:
1 Insert the GroupWise 7 Administrator for NetWare/Windows CD into the CD drive to start the
858 GroupWise 7 Administration Guide
Section 53.2.1, "Installing Additional Components on NetWare or Windows," on page 858
Section 53.2.2, "Installing Additional Components on Linux," on page 859
"Installing a NetWare or Windows WebAccess Agent" on page 858
"Installing a NetWare or Windows WebAccess or WebPublisher Application" on page 858
"NetWare and Windows: Setting Up GroupWise
Guide.
Installation program, click Install Products, click GroupWise WebAccess, then click Install
GroupWise WebAccess. If the Installation program does not start automatically, run
setup.exe from the root of the CD.
or
If you've already copied the GroupWise WebAccess software to a software distribution
directory, run setup.exe from the internet\webacces directory.
Agent software, and create the WebAccess Agent's object in Novell
If you are installing to a domain where another WebAccess Agent already exists, you must use
a different directory and object name than the one used for the existing WebAccess Agent.
WebPublisher Applications know about the WebAccess Agent and can direct the appropriate
user requests to it. For information, see
Support," on page 860.
installation program, click Install Products, click Groupwise WebAccess, then click Install
GroupWise WebAccess. If the installation program does not start automatically, run
setup.exe from the root of the CD.
Section 53.3, "Configuring Redirection and Failover
WebAccess" in the
®
eDirectory .
TM