Novell ACCESS MANAGER 3.1 SP2 - POLICY GUIDE 2010 Manual page 165

~~RU~RuleID_1181251958207~Manager~DNF~~1:1~~Success(67)
Table 6-2 describes the fields of a Rule Evaluation Result trace.
Fields in a Rule Evaluation Result Trace
Table 6-2
Element
<RuleID>
<ParentPolicyName>
<ConditionSetJoinType>
<ConditionSetCount:ActionCount>
<Result>
Condition Set Evaluation Result
A CS trace has the following fields
~<ConditionSetID>~<JoinType>~<NOT>~<ConditionCount>~~<Result>
A CS trace looks similar to the following:
~~CS~1~~ANDs~~1~~True(69)
Description
The identifier assigned to the rule.
In this sample RU trace, this element is set to
RuleID_1181251958207
The name of the parent policy to which the rule is
assigned.
In this sample RU trace, this element is set to
The type of joining that occurs between conditions and
condition sets. It is set to one of the following:
CNF: Indicates that sets are ANDed and conditions
within a condition group are ORed.
DNF: Indicates that sets are ORed and conditions
within a condition group are ANDed.
In the sample RU trace, this element is set to
The number of condition sets and actions defined for this
rule.
In the sample RU trace, this is 1:1, for one condition set
and one action.
A string followed by a number that specifies the result of
the evaluation. See "Policy Result Values" on page
In the sample RU trace, this is
that the rule was successfully evaluated.
Troubleshooting Access Manager Policies 165
.
Manager
.
DNF
169.
, indicating
Success(67)
.