Novell ACCESS MANAGER 3.1 SP2 - POLICY GUIDE 2010 Manual page 132

6 Click OK twice, then click Apply Changes.
7 Assign the policy to the
Edit > [Name of Reverse Proxy] > [Name of Proxy Service] > Protected Resources.
8 In the Protected Resource List, select the protected resource for the page or click New to create
one, then specify a name for it.
9 In the URL Path List, ensure that the path ends with the name of the page. For example:
/mycompany.html
10 Click Identity Injection, select the name of the IP address policy, then click Enable.
11 To save the changes, click Configuration Panel > OK.
12 On the Configuration page, click OK, then click Update.
13 Configure the Web server to use the IPAddress values in the custom header to distinguish
between external and internal customers.
In this sample scenario, the Web server is configured to recognize IP addresses starting with
as internal customers and all other addresses as external customers.
10.
132 Novell Access Manager 3.1 SP2 Policy Guide
page of the Web server. Click Access Gateways >
mycompany.html