Modifying Existing Traffic Policies For Full Tunneling - Novell ACCESS MANAGER 3.1 SP2 - SSL VPN SERVER GUIDE 2010 Manual

8 Specify the following information in the Other Configuration section:
Identity Provider Address: Specify the IP addresses or the DNS name of the Identity Server.
Access Gateway Address: Specify the IP address or DNS name of the Access Gateway if your
server is accelerated by the Access Gateway. This field is not present if you have installed the
ESP-enabled SSL VPN.
9 To save your modifications, click OK, then click Update on the Configuration page

3.4.2 Modifying Existing Traffic Policies for Full Tunneling

1 In the Administration Console, click Devices > SSL VPNs > Edit.
2 Click the traffic policy that you want to modify. The Edit Traffic Policy page is displayed.
3 Configure the following fields:
Destination Network: Specify 0.0.0.0 as the destination network IP address.
Action: Select Encrypt to allow the service in encrypted form or select Deny to deny services.
Leave the default values in the other fields unchanged.
4 Click OK to save your changes.
If you are using Traditional SSL VPN, you are prompted to configure the IP address or DNS
name of the Identity Server, and the Linux Access Gateway.
5 Click OK.
6 Select Gateway Configuration from the Basic Gateway Configuration section.
52 Novell Access Manager 3.1 SP2 SSL VPN Server Guide