Ssl Vpn Server; Ssl Vpn Linux Client; Ssl Vpn Macintosh Client; Ssl Vpn Windows Client - Novell ACCESS MANAGER 3.1 SP2 - SSL VPN SERVER GUIDE 2010 Manual

A.8.1 SSL VPN Server
To verify the status of the SSL VPN components, use the commands listed in the table below:
Component
Connection Manager
Sock Daemon
Secure Tunnel
OpenVPN
A.8.2 SSL VPN Linux Client
Component
Policy Resolver for Kiosk mode
Secure Tunnel for Kiosk mode
OpenVPN for Enterprise mode
A.8.3 SSL VPN Macintosh Client
Component
Policy Resolver for Kiosk mode
Secure Tunnel for Kiosk mode
OpenVPN for Enterprise mode
A.8.4 SSL VPN Windows Client
Check to see if the stunnel and polresolver processes are up and running if SSL VPN is in Kiosk
mode, and check openVPN if SSL VPN is in Enterprise mode.
A.9 Unable to Contact the SSL VPN Server
In the client browser, if you encounter the message
message
SSLVPN Gateway is not available
Error Status: Check the status at
var/log/novell-openvpn.log
SSL VPN Status: At the command prompt, enter the following command:
/etc/init.d/novell-sslvpn status
Message Log: Check the
106 Novell Access Manager 3.1 SP2 SSL VPN Server Guide
Command
pgrep connman
pgrep sockd
pgrep stunnel
pgrep openvpn
Command
pgrep polresolver
pgrep stunnel
pgrep openvpn
Command
ps -A | grep polresolver | grep -v
grep
ps -A | grep stunnel | grep -v grep
ps -A | grep openvpn | grep -v grep
SSLVPN Gateway is in bad state
, verify the following:
/var/log/messages
.
file for more information.
/var/log/messages
,
/var/log/stunnel.log,
or the
and
/