Page 1
BLUETREK E2 user guide Thank you for choosing the BLUETREK® E2, we hope you will enjoy the convenience we are bringing to you. The BLUETREK® E2 offers many functions, please read this manual before getting started. EC-Declaration of Conformity We, Innovi Technologies Ltd of Suite 501-3, 5/F., Chinachem Leighton Plaza,...
Page 2
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3
• The use of any other charger will automatically suspend the warranty. Pairing the BLUETREK® E2 Before using the BLUETREK® E2 headset, you must pair it with your Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth® mobile phone user manual). 3. When the BLUETREK® E2 is switched off, press and hold the TALK button for about 7 seconds until the indicator light flashes red and blue alternatively. And a sound can be heard in the speaker.
During an active call, press and hold the VOL+ button for approximately 2 seconds.A periodic tone can be heard in the speaker when the microphone is muted. To end the mute function When the microphone is muted quickly press the VOL+ button on the BLUETREK® E2. The periodic tone will end. ® E2...
Your headset is already paired with mobile phone A. You then perform a pairing with mobile phone B. All incoming calls on mobile phone A or B can be answered by BLUETREK® E2 as long as the headset is on standby. However, you can only use mobile phone B (i.e. the lastly paired phone) for outgoing calls.