Advertisement
Power Indicator
The Power Indicator will turn RED when only bus power is supplied, will
turn GREEN when external power is supplied.
USB Indicators
1. There are three USB indicators. If the USB Downstream Ports are
ready for use, the indicators will turn ON.
2. If over-current happens for certain USB Downstream Ports, the
corresponding USB Indicator will turn OFF to indicate that this port is
not working at the moment.
3. When over-current situation is resolved, the USB Indicator will turn
ON again.
LAN Indicators
1. Link/Act (Orange): This LED turns on if the 10/100Mbps
(100BASE-TX) Ethernet is connected.
2. Transmission (Green): Blinking to indicate that the data is being
received or transmitted through the RJ-45 port.
USB Indicators
LAN Indicators
2. Installing Harbour 2.0
6
Fig.2
Harbour 2.0 User's Manual
6
Power Indicator
Hide quick links:
Advertisement
