Fluke GB-152-AF Operation And Maintenance Manual page 2

Gas booster with control kit

Table of Contents

GB-152-AF™ OPERATION AND MAINTENANCE MANUAL

This equipment described in this manual is designed and manufactured for the intended purpose of

generating high pressure gas. Certain precautions need to be followed during installation and operation of this

device. Reading and understanding this material is essential to the safe and correct operation of the unit.

Pressurized equipment is potentially dangerous. The equipment described in this manual generates and

controls very high gas pressures. It should not be operated by anyone who has not become thoroughly familiar

with this manual. Additional training in general and pressure specific safety procedures will help assure

protection from harm or damage to personnel or property. Responsibility for the proper and safe operation of

this instrument rests with the user.

High pressure liquids and gases are potentially hazardous. Energy stored in these liquids and gases

can be released unexpectedly and with extreme force. High pressure systems should be assembled and

operated only by personnel who have been instructed in proper safety practices.

This instrument is not to be operated in any other manner than that specified by the manufacturer.

Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the express written permission of DH Instruments 4765

East Beautiful Lane Phoenix AZ 85044-5318 USA.

DH Instruments makes every effort to ensure the accuracy and quality of its published materials; however, no warranty, expressed

or implied, is provided. DH Instruments disclaims any responsibility or liability for any direct or indirect damages resulting from the

use of the information in this manual or products described in it.

endorsement by DH Instruments of that product or brand. This manual was originally composed in English and was subsequently

translated into other languages. The fidelity of subsequent translations cannot be guaranteed. In case of conflict between the

English version and another language version, the English version takes precedence.

Products described in this manual are manufactured under international patents and one or more of the following U.S. patents:

5,142,483; 5,257,640; 5,331,838; 5,445,035. Other U.S. and international patents pending.

DH Instruments, DH, DHI, PGC, PPC, PPC3, RPM4, GPC1 and CalTool are trademarks, registered and otherwise.

Swagelok is a registered trademark of the Swagelok Company.

Teflon is a registered trademark of the 3M Corporation.

Document No. 550137b-01

070628

Printed in the USA

Mention of any product or brand does not constitute an

Table of Contents