Related Manuals for LaView B10
Summary of Contents for LaView B10
- Page 2 Solid red light: camera is initializing or network abnormal Blinking red light: camera is on pairing Solid blue light: camera running correctly Press and hold the reset button for 5 seconds to reset the camera (Camera will return to factory default settings)
- Page 4 B10 camera Scan the QR code below to download LaView APP...
- Page 5 MAKE SURE YOUR PHONE IS CONNECTED TO A 2.4 GHZ WI-FI NETWORK Enter the Wi-Fi password to Wi-Fi information.
- Page 7 After adjusting the view angle, please tighten this screw 1. Fix the camera on the wall with screws 2. Adjust the view angle properly (as shown in the live view)
- Page 9 Check if the Wi-Fi setting is changed. If so, please reset the camera.
- Page 10 If the camera is placed at a location with heavy traffic, we recommend relocating it to a place with less traffic to receive fewer alerts. The camera is equipped with 2K Ultra HD lens and sensor to condition or with high contrast. Ensure it is NOT facing directly to bright lighting source such as sun light.
- Page 11 The camera is equipped with a Starlight sensor as well as Infrared LED. We recommend using color night vision mode in low light, such as moon light and street light. However, when the camera is placed at pitch black lighting condition, we recommend setting the camera on black and white night vision mode for best night time image quality.
- Page 14 1/2.8 2.8mm, FOV120° 2304x1296 DC 12V, 1A 2.44"x2.24"x5.63" (62x57x143mm) 0.53lbs (240g)
- Page 15 Your LaView product is protected by a 1-year warranty from the purchase date. For more information on repairs, exchange, and other policies, please visit www.laviewusa.com.
Need help?
Do you have a question about the B10 and is the answer not in the manual?
Questions and answers