User Manual (English); General Information; Work Enviroment - Dicota DataDesk 460 User Manual

User Manual DataDesk 460
Dear Customer,
We would like to thank you that you bought a DICOTA product. Before you use your DataDesk 460 for the first time please read the following
user manual thoroughly. The DataDesk 460 is suitable for the currently available printer model HP DJ 460. Please consult your local dealer or
the product detective at www.dicota.com to find out which Notebooks are suitable.
Table of contents
Table of contents
General information
- Work enviroment
- Operating voltage
Combination lock / scope of supply
Interior equipment
- Case lid
- Case bottom
Installation of your printer
Installation of your Notebook
Connection: Notebook - printer
General information - DataDesk 460
General information - DataDesk 460

Work enviroment

Please make sure that your DataDesk 460 is always operated on a steady, non-skid surface. Especially avoid working surfaces in dusty or damp environments!
→ When opening your DataDesk 460 attaché case, please make sure that the case shell with the case handle is upside!
→ If you would like to use your DataDesk 460 without the upper case shell, you can remove it as follows: Open the attaché case at an angle of approx. 60° - 70°. At this angle
you feel a slight resistance and you can detach the case lid by pulling it horizontally to the right.
5
5
6
6
7
7
7
7
8
8
5