Download Print this page

AOMEKIE AO2001N Instruction Manual

300x70mm astronomical telescope

Advertisement

Quick Links

AOMEKIE
300X70mm ASTRONOMICAL TELESCOPE
INSTRUCTION MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the AO2001N and is the answer not in the manual?

Questions and answers

Summary of Contents for AOMEKIE AO2001N

  • Page 1 AOMEKIE 300X70mm ASTRONOMICAL TELESCOPE INSTRUCTION MANUAL...
  • Page 2 Contents Introduction & Warning..................2 Telescope Parts......................3 Assembly........................4 Telescope Use......................7 Tips.........................9 Cleaning & Maintenance of Optics................9 What to Look for in the Sky.................10...
  • Page 3 Introduction Congratulations on purchasing your new telescope. We hope it will give you many years of enjoyment as it opens your eyes to some of natures most wondrous sights. Before use, please read this manual carefully and completely. It contains the information you will need to know to use your telescope.
  • Page 4 Telescope Parts 8. Tilt lock knob 1. Main tube 9. Azimuth lock knob 2. Objective 10. Center column lock knob 3. Finderscope 11. Phone adapter 4. Eyepiece 12. Tripod leg 5. Diagonal lens Note: Cellphone (Not include) 6. Focusing knob 7.
  • Page 5 Assembly 1. Gently pull the tripod apart and 2. Loosen another lock knob and use screw pan handle in the tripod the pan handle to move the pan head to desired direction. 3. Srew the threaded post of the 4. Insert the finderscope into the plate into the socket on the main main tube until hear a "click".
  • Page 6 5.The horizontal position of the finder mirror 6. Loosen the thumbscrew and remove and the lens barrel can be adjusted by the cap. adjusting the three screws until the same observation object appears in the two. 8. Loosen the thumbscrew and insert 7.
  • Page 7 Assembly is completed...
  • Page 8 Telescope Use 2. Loosen screw, look into the eyepiece 1. Remove all covers. and turn the telescope to your target, then tighten the screw 3. Roll focusing knob to make target clear.
  • Page 9 For calibration, move the finderscope 1. For calibration, move the finderscope until the target is the same as in the until the target is the same as in the telescope. telescope. 3. Look into the eyepiece of 4. Look into the eyepiece of telescope, finderscope, turn the direction of roll the focusing knob to make the telescope to your target,then...
  • Page 10 Tips 1. Always start viewing with your low power eyepiece since its wide viewing field will make it easier to locate objects. By the way, you will notice that stars, still look like points of light when seen through your telescope. This is because they are so far away.
  • Page 11 2. After using the telescope there might be dew condensation, on the optical surfaces. When the telescope is brought inside remove the dust caps and allow the moisture to evaporate naturally Point the telescope downwards so as to minimize the collection of airborne dust. 3.
  • Page 12 The moon The moon is the easiest target to find in the night. When it is in the full position, when the entire face is lit, then it bathes the night with a silvery light washing out the rest of the sky from all but the brightest objects. The best time to view the moon is actually not when it is full but rather anytime up to the first quarter, this is when the face appears to be half lit up.
  • Page 13 This gives the planet varying crescent shapes, as if a bite were taken out of it. Mars is the red planet. It is very noticeably red when rising above the horizon and stands out like a beacon in the night sky. The apparent brightness of Mars varies as the planet orbits around the sun so throughout its time being visible to us it will brighten and dim depending on how our two planets are aligned relative to each other.
  • Page 14 AOMEKIE Thanks for choosing us. Enjoy yourself!