Advertisement
Quick Links
Advertisement
Related Manuals for FeelNeedy YPD-C004
Summary of Contents for FeelNeedy YPD-C004
- Page 1 User Manual YPD-C004 Smart Pet Water Fountain...
- Page 2 Overview Power port Infrared sensor Water outlet Connecting wire Connecting tube Water level sensor Silent pump Red/blue water level indicator Stainless steel water tray Filter cotton Filter Filter tray Water container Water level window...
- Page 3 Product Specification Name Smart Pet Water Fountain Model YPD-C004 Size 249x206x166mm Battery 2600/4000mAh Rated voltage/current 0.11A Rated power 0.55W Capacity Net weight 1.1kg Main material SUS304+ABS What’s included Filter Filter cotton Main body Master control module Type-C cable Brush Tweezers...
- Page 4 Installation steps Step 1 Cleaning the components 1. Before installing or replacing the filter, immerse it in clean water for 5 minutes, then rinse it clean (to remove floating carbon generated by activated carbon during transportation). 2. Rinse the stainless steel water tray, filter tray, water container and pump with clean water.
- Page 5 4. Put the stainless steel water tray onto the filter tray. 5. Insert the master control module into the corresponding hollow space with the water outlet facing forward. Features Power button Power indicator Intermittent/constant Sensing mode indicator mode indicator Filter replacement indicator Power button Turn on: Press the power button once, the product will enter sensing mode and the...
- Page 6 Reset filter: In turned on status, press and hold the power button for 5s, the filter ● replacement indicator will flash 3 times then go out, which means filter usage time is reset successfully. Sensing mode Turn on the product, it will enter sensing mode and the sensing mode indicator will ●...
- Page 7 Power supply selection I. Wall outlet 1. Open the silicone waterproof cover at the power port of the master control module, insert the Type-C connector of the data cable into the power port, insert the other end into the adapter, and then insert the adapter into the wall outlet. Press the power button of the master control module, you can start to use it.
- Page 8 Maintenance and cleaning I. Daily cleaning and maintenance 1. Disconnect power supply and turn off the product before cleaning; keep the charging port dry. 2. Take out the filter cotton, filter, filter tray, and rinse them with clean water. 3. Immerse the water container, water tray, filter mesh in water and wash them clean. 4.
- Page 9 Matters needing attention I. Cautions 1. It is recommended to use a 5V-1A/2A power adapter with DC output that conform to national/regional safety standards for the product. 2. Please read the User Manual carefully before use. Once installed or used, it is deemed that you have carefully read and accepted the following precautions.
- Page 10 For FAQs and more information, please scan Lifetime Warranty Code 230309 support@feelneedy.com...
Need help?
Do you have a question about the YPD-C004 and is the answer not in the manual?
Questions and answers