Scan With A Multifunction Printer; Usb Speaker - NETGEAR DGND3700v2 Installation Manual

prints. After the print job is done, the printer status returns to the
Paused state.

Scan with a Multifunction Printer

You can use the scan feature of a multifunction printer.
1. Make sure that the printer's status shows as Available.
2. Click the Network Scanner button.
This activates the scanner window that is used to perform the
scans.

USB Speaker

 To control a USB speaker:
1. Select the USB speaker.
2. Click the Connect button to connect this speaker, or click
Disconnect to disconnect the speaker.
If you click Connect, and someone else is already connected to
the speaker, a request is sent to that person. The person who
receives the request can click an Accept or Reject button.
If someone is connected to the speaker and it is not being used (the
router does not detect any activity), the router holds the connection
for the amount of time that is in the timeout value, and then makes it
available.
20