Usb Control Center - NETGEAR DGND3700v2 Installation Manual

USB Control Center

The USB Control Center utility allows you to control a shared USB
device from your computer that is connected to the USB port on your
router. The utility allows you to control a printer.
The utility has to be installed on each computer on your network from
which you want to control the device. You can download this utility at
www.netgear.com/landing/en-us/readyshare.aspx.
When you launch the USB Control Center utility, a screen similar to
the following displays:
This is the main screen, which shows a device icon, the description
for this USB device, and its status.
Available. The device is available from the computer that you are
using.
Waiting to Connect. You need to connect to this device from the
computer that you are using. If this is the first time you are
connecting, you might be prompted to install the device driver.
17