Advertisement
Quick Links
Advertisement
Related Manuals for DèLonghi Eletta ECAM44.66 Series
Summary of Contents for DèLonghi Eletta ECAM44.66 Series
- Page 1 De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
- Page 2 ECAM44.66X COFFEE MAKER Instructions for use. Keep these instructions Visit www.delonghiregistration.com to register your product Visit www.delonghi.com for a list of service centers near you. ELECTRIC CHARACTERISTICS 120 V~ 60 Hz 1250 W MACHINE À CAFÉ Mode d’ e mploi . Conservez cette notice Visitez www.delonghiregistration.com pour enregistrer votre produit en ligne.
- Page 3 page 6 page 24 pàg. 44...
- Page 7 CONTENTS 8.9 Making LONG coffee using pre-ground coffee ..............13 1. IMPORTANT SAFEGUARDS ......7 8.10 Customising the “LONG coffee” quantity ..14 1.1 SAVE THESE INSTRUCTIONS ......7 9. MAKING CAPPUCCINOS AND MILK BASED 1.2 Short cord instructions .........7 COFFEES ..........14 2.
- Page 8 1. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following. • Read all instructions carefully. • Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom of the machine.
- Page 9 2. INTRODUCTION 3. DESCRIPTION Thank you for choosing the ECAM4466X automatic coffee and 3.1 Description of the appliance cappuccino maker. (page 3 - A ) We hope you enjoy using your new appliance. A1. Beans container lid Take a few minutes to read these instructions. A2.
- Page 10 3.3 Description of the accessories If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified (page 2 - C ) professional. C1. “Total Hardness Test” indicator paper C2.
- Page 11 5. TURNING THE APPLIANCE ON Place a container with a minimum capacity of 100ml under the coffee and hot water spouts (fig. 8). Please note! To enable the function, proceed as follows: Before turning the appliance on, make sure the main switch 1.
- Page 12 7. Press the OK button to confirm. 2. Press (B9) or (B10) (fig. 6) until “Energy saving” ap- The time is set. Press the MENU/ESC button to exit the menu. pears on the display (B4); 3. Press the OK button (B3 - fig. 7). “Disable?” is displayed; (or 7.6 Auto-start “Enable?”...
- Page 13 7.12 Beep Strong taste Extra-strong taste This enables or disables the beep emitted by the machine each To change the taste, press the button (B6 - fig. 10) time a button is pressed or an accessory is inserted/removed. To repeatedly until the required taste appears on the display (B4). disable or re-enable the beep, proceed as follows: 1.
- Page 14 If the coffee is delivered too slowly or etc.). Their meaning is explained in section “16. DISPLAYED not at all, turn one click clockwise to- MESSAGES”. wards “7”. • For hotter coffee, see section “8.5 Tips for a hotter coffee”. For fuller bodied creamier coffee, turn •...
- Page 15 8.10 Customising the “LONG coffee” quantity 7. Place a sufficiently large cup under the coffee spouts (A7) and frothed milk spout (D5). Adjust the length of the milk The appliance is set by default to automatically deliver about spout. To move it nearer the cup, simply pull it downwards 180ml of LONG coffee.
- Page 16 2. Press and hold the CAPPUCCINO button (B9) until the 6. After a few seconds, frothed milk is delivered from the milk spout (D5) into the cup below. For drinks with coffee, the name of the drink and “PROGRAM MILK” appear on the machine automatically makes the coffee after delivering display (B4);...
- Page 17 11.2 Cleaning the machine’s internal circuit 3. Press the button (B7). “HOT WATER” appears on the If the appliance is not used for more than 3-4 days, before using display (B4), together with a progress bar which fills grad- it again, we strongly recommend switching it on and: ually as preparation proceeds;...
- Page 18 1. Remove the drip tray and the grounds container (A10) (fig. 4. Press the two coloured re- 27); lease buttons inwards and 2. Empty the drip tray and grounds container and wash them; at the same time pull the 3. Check the condensate tray (A9) and empty if necessary; infuser outwards (fig.
- Page 19 11.10 Cleaning the milk container 12. DESCALING To keep the frother efficient, every two days clean the milk con- Descale the machine when the message “DESCALE” flashes on tainer (D) as described below: the display (B4). 1. Remove the lid (D2); Important! 2.
- Page 20 13. SETTING WATER HARDNESS liquid comes out of the coffee spouts and hot water spout and a series of rinses and pauses is performed to remove The DESCALE message is displayed after a period of time estab- limescale deposits from inside the machine; lished according to water hardness.
- Page 21 14.1 Installing the filter 8. Press the MENU/ESC button (B2) to enter the menu; 9. Press (B9) or (B10) (fig. 6) until “Install filter” appears Remove the filter (C4) on the display (B4); from the packaging. 10. Press the OK button (B3) (fig. 7); Turn the date indicator 11.
- Page 22 6. Press the OK button to confirm and the MENU/ESC button to exit the menu. 15. TECHNICAL DATA Voltage: 120 V~ 60 Hz max. 10 A Power: 1250 W Pressure: 1,5 MPa (15 bar) Water tank capacity: Size LxHxD: 260x470x365 mm Cord length: 1750 mm Weight:...
- Page 23 REDUCE COFFEE AMOUNT Too much coffee has been used. Select a milder taste by pressing the button (B6-fig. 10) or reduce the quantity of pre-ground coffee. FILL BEANS CONTAINER The coffee beans have run out. Fill the beans container (A3 - fig. 14). The pre-ground coffee funnel (A4) is clogged.
- Page 24 The coffee is weak or not creamy The coffee is ground too coarsely. Turn the grinding adjustment dial (A5) one enough. click anticlockwise towards "1" while the cof- fee mill is in operation (fig. 13). Continue one click at a time until coffee delivery is satisfac- tory.
Need help?
Do you have a question about the Eletta ECAM44.66 Series and is the answer not in the manual?
Questions and answers