Page 1
INSTRUCTIONS MANUAL 18” STAND FAN WITH REMOTE CONTROL Model: USF-780/2 READ AND SAVE THESE INSTRUCTIONS...
Page 2
CAUTION When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: To prevent fire or shock hazard, DO NOT expose this appliance to rain or moisture. Dangerous high voltages are present inside this enclosure.
Page 3
Switch the fan OFF and unplug it from the outlet when it is not in use, when moving it from one location to another and before cleaning. To disconnect, grip the plug and pull it from the wall outlet. Never pull by the cord. Do not attempt to repair, disassemble or modify the appliance.
Page 4
REMOTE CONTROLLER ASSEMBLY 1. Base Assembly Insert the bottom end of the pole into the centre hole of the base secured with 1 screw and 1 nut directly, no need any tool. 2. Fan Motor Assembly Position the motor and switch box to the inner tube, secured with screw.
Page 5
1. Speed control Speed is controlled by pressing the SPEED button. 0 = Off, 1 = Low, 2 = Medium, 3 = High 2. Swing function Press the swing button on the switch box, to activate the oscillation function for widespread breeze distribution.
Page 6
ErP Directive 09/125/EC RoHS Directive 11/65/EU & 15/863/EU CE-marking Directive 93/68/EEC The detailed declaration of conformity can be found at www.united-electronics.gr KALLIOPI KARYDA & CO LP 87A, 17th November str, P.C. 55534 Thessaloniki – Greece T: +302316006600 | F: +302316006650...
Need help?
Do you have a question about the USF-780/2 and is the answer not in the manual?
Questions and answers