Page 1
PRESSURE TANK PT COD.: DTVI_PT_2447 TRANSLATED FROM ORIGINAL REV.: 00 Read carefully before use! DATE: 18/11/2024...
Page 2
MAINTENANCE ..........................23 TROUBLESHOOTING ........................... 25 END OF LIFE ............................ 26 COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 18/11/2024...
Page 3
In case of doubts about the interpretation or reading of this document, please contact the manufacturer. DAV Tech disclaims all liability relating to improper use of the component. Comply with what is specified in this manual.
Page 4
Qualified technician made available by the manufacturer to perform complex operations in particular situations, or in any case according to what has been agreed with the customer. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 5
Not complying with this warning invalidates the CE certification of the tank. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 6
USE AND MAINTENANCE MANUAL 1.3 EU Declaration of Conformity Manufacturer Name: DAV Tech Srl Address: Via G. Ravizza, 30, 36075, Montecchio Maggiore (VI) DECLARES UNDER ITS OWN RESPONSIBILITY THAT THE PRESSURE COMPONENT Component: Tank PT Model: PT-2; PT-5, PT-10, PT-16...
Page 7
Touch screen that allows the user to interact with a graphical interface using Touch Screen fingers or special objects. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 8
(or the service center if present), specifying the component identification data. The customer can make use of commercial technical support from area agents or importers, who are in direct contact with DAV Tech Srl. Company name DAV Tech Srl Postal address Via Ravizza, 30, 37065, Montecchio Maggiore (VI) –...
Page 9
If it is necessary to use multiple fluids with the same tank, thorough cleaning must be performed to prevent residues from the previous processing from affecting the processing to be performed. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 10
Furthermore, it is possible that this type of tank is equipped with a stainless steel suction tube with a non- return valve placed at the bottom of the tube itself. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 11
The operation is the same, only the tube enters directly inside the container and the container itself is pressurized. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 12
COLOR MEANING CYAN Main air GREEN Product BLACK Data Notes COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 18/11/2024...
Page 13
The following provides a list of the main valve components with spare part codes. PT-5 PT-5LLS-CAP, PT-5LLS PT-5LLS-STIR PT-5LLS-AN COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 18/11/2024...
Page 14
(see point 21 for the various lengths and codes). COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 15
Pressure * Volume product is less than 25 (for example, the PT-16 can hold a maximum of 1.5 bar inside). COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 16
It is possible to request the 3D model of the component in the desired version from the manufacturer without any obligation. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 17
The component is built in compliance with the technical safety standards in force at the time of its construction. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 18
If the packaging is not intact, immediately contact the manufacturer, also sending photos of the packaging condition. Do not open it before notifying the manufacturer. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 19
It is recommended to perform component grounding to avoid accumulation of electrical charges. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 20
The tube must not be tightened too much otherwise there is a risk of breaking it or choking it too much, affecting the dosing quality. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 21
Commissioning must only proceed when all points have been completed successfully. 6 SOFTWARE N.A. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 22
The cover must be lifted the necessary length so that these components are not damaged. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 23
9. Turn the pressure reducer clockwise gradually and verify that there are no leaks. If positive, proceed and bring the reducer to working pressure. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 24
The tube must not be tightened too much otherwise there is a risk of breaking it or choking it too much, affecting the dosing quality. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 25
The times indicated below are indicative as they depend on how the component is used. Follow the variations suggested by technicians. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 26
Furthermore, all gaskets are in NBR, unless different agreements with the manufacturer. In this case, contact the manufacturer directly.. COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Page 27
Remove pressure from component and Fluid leaks from tank bottom stress contact manufacturer COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 18/11/2024...
Page 28
COD.: DTVI_PT_2447 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Need help?
Do you have a question about the PT - 2 and is the answer not in the manual?
Questions and answers