Specifications; Frequency Response; Connectors - Alesis MULTIMIX 12R Reference Manual

All measurements taken with an Audio Precision System One. All noise
measurements taken with trim at minimum and faders at unity gain with 22
Hz to 22 kHz bandwidth unless otherwise specified. All In & Out
measurements made on balanced +4 dBu connectors. (+4 dBu into a line
input with faders at unity and the meter reading "0" will yield +4 dBu into a
balanced load or -2 dBu into an unbalanced load.)

Frequency Response

10 Hz – 65 kHz +0/-1 dB
-3dB Point:

Connectors

MIC IN jacks:
LINE IN jacks:
INSERT jacks:
STEREO LINE IN and
STEREO AUX RETURN jacks:
MAIN OUT BALANCED,
MONITOR OUT, and
AUX SEND jacks:
MAIN OUT -10 dBV jacks:
TAPE IN jacks:
Multimix 12R Reference Manual
S
PECIFICATIONS
(any input to any output at
nominal operating levels)
125 kHz
Female XLR
(Pin 1 ground, Pin 2 +, Pin 3 -)
Female 1/4" 3-conductor phone
(Tip = +, ring = -, sleeve =
ground)
Female 1/4" 3-conductor phone
(Tip = send, ring = return, sleeve
= ground)
Inserting plug to first "click"
allows direct output without
breaking normal signal flow
Female 1/4" 3-conductor x 2
Female 1/4" 3-conductor phone
(Tip = +, ring = -, sleeve =
ground)
Female phono ("RCA") jacks
Female phono ("RCA") jacks

Specifications

45