Diamond Tech DL 5000 Operation Manual page 8

Diamond Tech
Diamond Laser 5000 3 Year Warranty
all Diamond Laser 5000 Band Saw and accessories are manufactured to high quality standards
and are serviced by highly qualified technicians.
Diamond Laser 5000 Band Saw is warranted to the original purchaser for three full years
from the original purchase date. During the three year period, if you feel the Diamond Laser
5000 Band Saw is not performing properly and needs to be serviced, contact Diamond Tech at
800-937-9593 or email info@dticrafts.com for a return authorization number. equipment will not
be accepted at Diamond Tech without a return authorization number.
if returning the Band saw for evaluation or repair, be sure to include your name, address, Daytime
phone Number with Area Code and a letter explaining the specific problem you are encountering.
You will be contacted if any necessary parts or service are not covered under the warranty.
Date of purchase ___ / ___ / ___
mark the return authorization number clearly on every package! Do not send this product back
without such prior authorization! return postage and insurance are the responsibility of the consumer.
Diamond Tech will return your equipment postage paid and insured if it is under warranty. any Band
saw no longer under warranty will be returned at the owner's expense. Diamond Tech reserves the
right to repair or replace faulty equipment at its discretion. The Diamond Laser 5000 Band Saw
is warranted against defective materials or workmanship. if the Diamond Laser 5000 Band Saw
suffers damage due to customer modifications and/or is used for any application other than that
for which it was designed, this warranty is void. This warranty does not include damage due to:
(a) neglect (B) accident (c) unreasonable use (D) improper maintenance (e) any other causes not
attributed to defects in material or workmanship. This warranty specifically excludes the Diamond
Laser 5000 Band Saw blades and/or guides. any implied or otherwise explicit guarantees made
through merchandiser of this product are not covered in this warranty coverage agreement and are
expressly disclaimed.
IMPORTANT NOTE: This machine was designed for certain applications only. Diamond tech strongly
recommends that this machine NOT be modified and/or used for any application other than that for
which it was designed. if you have any questions relative to its application, please contact us and
we will advise as to it proper use.
Diamond Tech, USA
5600 airport Blvd., suite c, Tampa, Florida 33634
Tech Support: 800-937-9593 (U.S.A., Canada) 813-806-2923 (International)
Fax: 800-299-3313, Email: info@dticrafts.com
www.DiamondTechGlass.com
5/2008