Bluetooth indicator Control playback Adjust volume level Control phone call Auracast operation Broadcast Receiver Other features Adjust lighting Listen to an external devices Philips Entertainment App App download Pair your Bluetooth speaker Sound Control Light Effect Source Control General Settings...
1 Important • A battery in extreme high or low temperatures during use, storage or transportation, and low air pressure at Safety high altitude can pose safety hazards. • Do not replace a battery with an Important safety instructions incorrect type that can defeat a •...
Turn the speaker on or off speaker Press and hold to enter pairing Congratulations on your purchase, and mode or to disconnect a connected welcome to Philips! To fully bene�t Bluetooth device from the support that Philips offers, register your product at www.philips.com/support.
3 Get started When the speaker is being charged, the Power LED turns red. When the speaker is fully charged, Always follow the instructions in this the Power LED indicator goes off. chapter in sequence. When battery level is less than 20%, you Charge the built-in will hear voice prompt once every 60 seconds.
Adjust the volume can also press and hold to enter Bluetooth pairing mode. 2. Enable Bluetooth and select “Philips S2000” in the Bluetooth list on your device for pairing. 3. Play audio on your Bluetooth device to start streaming music. Bluetooth indicator...
3 seconds or switch to another source in the App. Auracast LED Pairing for stereo mode Two identical wireless speakers (Philips S2000) can pair with each other for Auracast™ Broadcaster stereo sound. 1. To start, the speaker connected to your The default Auracast™ broadcast setting Bluetooth device will be used as the primary on product is Public (unencrypted broadcast).
Press the on the speaker or via • Or use a USB-A to A cable(not included) to the app to control the light effect. connect the product with your laptop/devices, select the Philips S2000 USB on your device for...
Apple App Store or Google Play to download the app. Open the Philips Entertainment App on your mobile device, press 'Add device +' to discover Philips S2000. Ensure that Bluetooth is enabled on your mobile. When you connect the App to your speaker for the �rst time, you will be...
Once your speaker is connected with Light Effect Entertainment APP, you may enjoy further features and set your preference easily. Sound Control Source Control Press icon on the App to select Bluetooth / Auracast receiver / USB Relaxation / Concentration / Masking Generative / Ambient / Nature...
General Settings Setup PartyLink mode With the you may notice there has To purchase more S2000 or other Philips' new �rmware for upgrade. speaker (support Auracast™) to enjoy the PartyLink, follow the steps in the APP you can easily pair up altogether..
Built-in Lithium battery 2500 mAh before requesting service. If the problem Dimensions (W x H x D) 181x71x71mm remains unsolved, go to the Philips 477g Weight (main unit) website (www.philips.com/support). When you contact philips, ensure that Operation Ambient 0°C~40°C...
Move the device closer to this speaker or remove any obstacle between them. Compliance Fail to �nd [Philips S2000] on your Bluetooth device for pairing Press and hold for 3 seconds to Hereby, TP Vision Europe B.V. declares...
Page 14
Inform yourself about the local separate FCC and IC statement collection system for electrical and electronic products and batteries. Follow FCC information local rules and never dispose of the The device complies with the FCC rules, product and batteries with normal Part 15.
(4) Consult the dealer or an experienced Trademark notice radio/TV technician for help. IC-Canada: CAN ICES-(B)/NMB-(B) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic The Bluetooth word mark and logos Development Canada’s licence-exempt are registered trademarks owned by RSS(s).
Page 16
Speci�cations are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
Need help?
Do you have a question about the TAS2000 and is the answer not in the manual?
Questions and answers